可光聚合的高官能度甲基丙烯酸酯单体的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21304011)


Synthesis and Characterization of Photopolymerizable Multifunctional Methacrylate Monomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    可光聚合的高官能度甲基丙烯酸酯单体以丁二醇为起始剂,与马来酸酐和甲基丙烯酸缩水甘油酯(GMA)逐步反应制备。红外光谱和核磁共振波谱对其结构进行表征,实时红外探讨了高官能度甲基丙烯酸酯单体的光聚合动力学,动态力学分析和热重分析研究了其固化膜的动态力学性能和热稳定性。结果表明,随着单体官能度的增加,其光聚合速率逐渐增加,最终双键转化率逐渐降低。储能模量、玻璃化转变温度及最高分解温度随着官能度数的增加而增大,G5固化交联后储能模量达27.9×108 Pa,玻璃化转变温度为117.8 ℃,最高分解温度为405.4 ℃。官能度对不同基材的附着力基本没有影响,单体在聚碳酸酯(PC)板上的附着力最好,剥离率为1%,铅笔硬度5H。

    Abstract:

    Photopolymerizable multifunctional methacrylate monomers were prepared with butanediol as initiator by maleic anhydride and glycidyl methacrylate (GMA) stepwise reacting. The structures of multifunctional methacrylate monomers with different functional groups were characterized by FT-IR and 1H-NMR. The results indicate with increase of the monomer functionality, the final conversion rate decreases, the crosslink density, storage modulus, glass transition temperature, heat stability and pencil hardness all increase. The fifth generation monomer modulus reaches the maximum for 27.9×108 Pa, the glass transition temperature is 117.8 ℃. Its decomposition temperature also gradually increases with the degree of crosslinking increasing, peaked at 405.4 ℃. Functionality has no effect essentially on the adhesion of different substrates, and the adhesion of cured film on polycarbonate(PC) board is preferred, the degree of peeling is 1%, the pencil hardness is 5H.

    参考文献
    相似文献
    引证文献
引用本文

凌俊杰, 王克敏, 聂俊, 俞强.可光聚合的高官能度甲基丙烯酸酯单体的合成与表征[J].高分子材料科学与工程,2016,32(12):7-12. Junjie Ling, Kemin Wang, Jun Nie, Qiang Yu. Synthesis and Characterization of Photopolymerizable Multifunctional Methacrylate Monomer[J]. Polymer Materials Science & Engineering,2016,32(12):7-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-12-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司