Abstract:Recycled poly(ethylene terephthalate) bottles (R-PET) were used as main materials, ethylene/methyl acrylate/methyl acrylic glycidyl ester (E-MA-GMA) was selected as compatilizer, then composite foam materials were prepared in twin-screw extruder by blending R-PET/PC/E-MA-GMA (70/30/10) blends with hollow glass microspheres (HGM) that was pre-treated with silane coupling agent KH560. And the effect of HGM contents on properties of composite foam materials was discussed by differential scanning caloremitry(DSC), SEM, bulk density, limited oxygen index(LOI), heat conductivity coefficient and mechanical performance testing. The results reveal that KH560 is successfully grafted onto the surface of HGM, which is closely joint with the resin matrix. Study also shows that with increasing addition of HGM, the crystallinity of R-PET is hugely inhibited, the tensile strength and notched impact strength of the composite foam materials are decreased, while the bulk density of composite foam materials decrease efficiently, the minimum bulk density is 0.729 g/cm3, thermal insulation is improved, the heat conductivity coefficient is decreased to 0.089 W/(m·K), and dripping phenomenon is prevented during flaming test.