HDPE/LDPE共混物超临界CO2挤出发泡成核剂的优选
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省“双创计划”


Optimization of Foaming Nucleating Agents for HDPE/LDPE Extrusion Foaming with Supercritical Carbon Dioxide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以高密度聚乙烯(HDPE)和低密度聚乙烯(LDPE)按7∶3质量比的熔融共混物为原料,超临界二氧化碳(scCO2)为物理发泡剂,通过挤出发泡的方法制备聚乙烯共混物的泡沫材料。系统研究了不同种类成核剂以及复合成核剂的成核效果。结果表明,成核剂的加入使流变性能变优,CO2的溶解度上升,结晶温度上升。且1.0%(质量分数,下同)滑石粉和1.0%聚乙酸乙烯酯(PVAc)的复合成核剂发泡效果最佳,制备的聚乙烯共混物泡沫材料平均孔径可达254 μm,孔密度6.60×104 cells/cm3,发泡倍率6.02。

    Abstract:

    The blend of high density polyethylene (HDPE) and low density polyethylene (LDPE) in a mass ratio of 7∶3 was extrusion foamed with supercritical carbon dioxide (CO2) as physical blowing agent. The nucleation effect of different nucleating agents on the extrusion foaming was systematically studied. The rheology properties are improved, and the solubility of CO2 rises, as well as rise of the crystallization temperature when the nucleation agents are added. The optimum foams with the average cell size of 254 μm, cell density of 6.60×104cm-3 and expansion ratio of 6.02 can be obtained from PE composites contained with 1.0% polymer vinyl acetate (PVAc) and 1.0% talc.

    参考文献
    相似文献
    引证文献
引用本文

高峰, 万辰, 刘涛, 赵玲, 赵航, 蔡涛涛. HDPE/LDPE共混物超临界CO2挤出发泡成核剂的优选[J].高分子材料科学与工程,2016,32(12):104-108. Feng Gao, Chen Wan, Tao Liu, Ling Zhao, Hang Zhao, Taotao Cai. Optimization of Foaming Nucleating Agents for HDPE/LDPE Extrusion Foaming with Supercritical Carbon Dioxide[J]. Polymer Materials Science & Engineering,2016,32(12):104-108.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-12-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司