4种铺地材料对丁苯胶生胶熔融流淌燃烧行为的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51306097);山东省自然科学基金资助项目(ZR2014EEM037);灭火救援技术公安部重点实验室基金(KF201405)


Influences of Four Flooring Materials on Running Fire Behaviors of Styrene-Butadiene Rubber Melts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为研究铺地材料对丁苯胶(SBR)熔融流淌燃烧行为的影响,文中选取了瓷砖、钢板、聚氯乙烯(PVC)地板革和石膏板4种铺地材料,在自行搭建的实验平台上进行燃烧实验,获得了质量、液池及池火面积、温度场等数据。分析表明,4种铺地材料上丁苯胶(SBR)液池扩展速率、池火蔓延速率、燃烧速率及火焰温度从大到小的顺序均为:钢板>石膏板>PVC地板革>瓷砖,基本与铺地材料的热容大小顺序(瓷砖>石膏板>PVC地板革>钢板)相反,其中PVC地板革裂解产物的阻燃性进一步降低了其燃烧速率。此外,由于其良好的导热性,钢板对燃烧的流淌熔体的熄灭作用随时间先增大后减小,SBR燃烧速率后期出现快速增长,表现出非线性特点。

    Abstract:

    An experimental setup was built to measure the mass, pool area, pool fire area and flame temperature of styrene-butadiene rubber (SBR) on four flooring materials including tile, stainless steel plate, PVC floor leather and plasterboard. The data show that the spread rates of pool area and pool fire area, the burning rate and the flame temperature from high to low are in the same order: steel plate>plasterboard>PVC floor leather>tile, which is attributed to that the thermal capacity from high to low is in the order: tile>plasterboard>PVC floor leather>steel plate. The burning rate of SBR on PVC floor leather is slightly lower than that on plasterboard, which might result from the flame retardancy of PVC decomposition products. In addition, it is found that the suppression effect of steel plate on running fire of SBR melts increases initially and decreases subsequently. Correspondingly, the burning rate of SBR on steel plate increases initially slowly and subsequently rapidly, demonstrating the non-linear characteristic.

    参考文献
    相似文献
    引证文献
引用本文

傅应才, 王勇, 张峰.4种铺地材料对丁苯胶生胶熔融流淌燃烧行为的影响[J].高分子材料科学与工程,2016,32(12):109-114. Yingcai Fu, Yong Wang, Feng Zhang. Influences of Four Flooring Materials on Running Fire Behaviors of Styrene-Butadiene Rubber Melts[J]. Polymer Materials Science & Engineering,2016,32(12):109-114.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-12-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司