PEO/CaCO3/PLA复合材料开孔结构的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51273065)


Preparation of Open Cell Porous Material by Leaching PEO/CaCO3/PLA Composite Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用聚乳酸(PLA)、聚氧化乙烯(PEO)、碳酸钙(CaCO3)熔融共混制备具有开孔结构的PLA多孔材料,借助于扫描电镜、孔隙率、热分析和压缩性能的测试方法,研究了连续混炼工艺对多孔材料结构和性能的影响。结果表明,过高或过低的转子转速和加料量都会导致多孔材料孔隙率的下降。当转子转速为600 r/min,加料量为2.61 kg/h时,孔隙率达到最大值76.8%,压缩模量和压缩强度分别为4.3 MPa和2.9 MPa。提高转子转速有利于多孔材料结晶性能的提高。

    Abstract:

    Using polylactic acid (PLA)/ polyethylene oxide (PEO)/CaCO3,PLA porous materials with open cell were prepared by blending method. Series characterizations such as SEM, DSC, porosity and compressive property were conducted to study the effect of continuous mixing process on morphologies and properties of the porous material. The results indicate that too high or too low rotor speed and feed speed will result in decrease of the porosity. The porosity of the porous material reaches to the maximum of 76.8% when the rotor speed is 600 r/min and the feed speed is 2.61 kg/h, and the compressive modulus and compressive strength is 4.3 MPa and 2.9 MPa respectively. The improvement of rotor speed will be beneficial to improvement of the crystallization property of porous materials.

    参考文献
    相似文献
    引证文献
引用本文

王云祥, 谢林生, 马玉录, 张颖, 郝玉婷. PEO/CaCO3/PLA复合材料开孔结构的制备[J].高分子材料科学与工程,2016,32(12):121-125. Yunxiang Wang, Linsheng Xie, Yulu Ma, Ying Zhang, Yuting Hao. Preparation of Open Cell Porous Material by Leaching PEO/CaCO3/PLA Composite Material[J]. Polymer Materials Science & Engineering,2016,32(12):121-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-12-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司