乙烯-乙烯醇共聚物超滤膜的制备及对乳清蛋白的分离性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51373120, 51503146);天津市应用基础与前沿技术研究计划(15JCZDJC37600);省部共建分离膜与膜过程国家重点实验室自主课题(15PTSYJC00240);国家级大学生创新创业训练计划资助项目(201410058082)


Preparation and Whey Protein Separation Property of Poly(ethylene-co-vinyl alcohol) Ultrafiltration Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以亲水性乙烯-乙烯醇共聚物(EVAL)为原料,采用浸没沉淀相转化法,通过调节聚合物浓度,制备不同截留相对分子质量的亲水性EVAL超滤膜,采用场发射电镜对EVAL超滤膜微观结构形貌进行研究,并对其渗透性能、截留性能及乳清蛋白分离性能进行考察。结果表明,当聚合物含量分别为20%和25%时,EVAL超滤膜截留相对分子质量可分别达到20000 (EVAL 20000)与6000 (EVAL 6000)。2种超滤膜对乳清蛋白的截留效果均可达到93%以上,其中EVAL20000具有更高的通量及乳糖透过率,更加适合于乳清蛋白的回收,其浓缩液制得的乳清蛋白粉蛋白含量为39.7 g/100 g。

    Abstract:

    The hydrophilic poly(ethylene-co-vinyl alcohol) (EVAL) ultrafiltration membrane was prepared by phase inversion method. The molecular weight cut off (MWCO) of EVAL membranes was regulated by varying EVAL polymer concentration. The microstructure of EVAL membranes was investigated by field emission scanning electron. The permeability, retention and whey protein separation property of EVAL membranes were studied. The results show that the MWCOs of EVAL membranes are 20000 (EVAL 20000) and 6000 (EVAL 6000) when EVAL polymer concentration is 20% and 25%, respectively. The whey protein rejection of EVAL 20000 and EVAL 6000 is higher than 93%. The higher flux and lactose permeation of EVAL 20000 were observed. The protein content of dry powder prepared with EVAL 20000 is 39.7 g/100 g.

    参考文献
    相似文献
    引证文献
引用本文

刘琦, 叶卉, 张玉忠, 李煜, 李君, 赵莉芝, 李泓.乙烯-乙烯醇共聚物超滤膜的制备及对乳清蛋白的分离性能[J].高分子材料科学与工程,2016,32(12):145-150. Qi Liu, Hui Ye, Yuzhong Zhang, Yu Li, Jun Li, Lizhi Zhao, Hong Li. Preparation and Whey Protein Separation Property of Poly(ethylene-co-vinyl alcohol) Ultrafiltration Membrane[J]. Polymer Materials Science & Engineering,2016,32(12):145-150.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2016-12-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司