磷杂菲反应型阻燃多元醇制备聚异氰脲酸酯硬泡及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2014年泉港区科技小巨人重大专项(2014ZD08);2014年泉州市科技计划项目(2014G30);2015年泉州市科技计划项目(2015Z8)


Preparation and Properties of Reactive Flame Retardant PIR Rigid Polyurethane Foam with Phosphaphenanthrene Group
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物( DOPO)、顺丁烯二酸、丙三醇、乙二醇为原料,合成出一种基于磷杂菲基团的新型无卤阻燃多元醇。通过傅里叶变换红外光谱、核磁共振氢谱表征了目标化合物的基本结构,热失重测试表明硬泡的残炭量也随阻燃多元醇的增加而升高,锥形量热测试表明阻燃多元醇的加入,使热释放速率和总热释放量大幅下降,阻燃多元醇制备的硬泡极限氧指数为267,达到UL-94V0级,压缩强度测试结果表明阻燃泡沫能满足建筑用聚氨酯硬泡保温材料高承载使用要求。

    Abstract:

    A novel halogen-free flame retardant polyols with phosphaphenanthrene group was synthesized via 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO), maleic acid, glycerine and ethylene glycol by one step reaction.And the structure of polyols was characterized by Fourier transform infrared spectra (FT-IR) and 1H nuclear magnetic resonance spectrum(1H-NMR). The results of thermogravimetric analysis show that the char yield increases with the addition of DOPO-MA-VG+EG. The Cone test indicates the peak heat release rate (PHRR) and total heat release (THR) decrease because of DOPO-MA-VG+EG. The LOI of rigid foam is 26.7 and it reaches UL-94V0 level when added to 1.5% phosphorus content. Compressive stress testing suggests that the polyisocyanurate rigid foams are excellent enough to meet the standard which can support high load capacity.

    参考文献
    相似文献
    引证文献
引用本文

伍毓强, 杜鹏飞, 刘志鹏, 徐井水, 白欣, 陈登龙.磷杂菲反应型阻燃多元醇制备聚异氰脲酸酯硬泡及性能[J].高分子材料科学与工程,2017,33(1):12-17. Yuqiang Wu, Pengfei Du, Zhipeng Liu, Jingshui Xu, Xin Bai, Denglong Chen. Preparation and Properties of Reactive Flame Retardant PIR Rigid Polyurethane Foam with Phosphaphenanthrene Group[J]. Polymer Materials Science & Engineering,2017,33(1):12-17.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-01-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司