聚乳酸-聚乙二醇-聚乳酸/聚(N-乙烯基吡咯烷酮)交联共聚物膜的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省自然科学基金资助项目(2015CFB324)


Preparation and Properties of Poly(lactide)-Poly(ethylene glycol)-Poly(lactide)/Poly(N-vinylpyrrolidone) Crosslinked Copolymer Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在制备聚乳酸-聚乙二醇-聚乳酸(PLA-PEG-PLA)嵌段共聚物的基础上,以丙烯酸酯封端制备了PLA-PEG-PLA大分子单体。PLA-PEG-PLA大分子单体作为交联剂与N-乙烯基吡咯烷酮(NVP)单体经光聚合制备了系列PLA-PEG-PLA/PVP交联共聚物膜。核磁共振测试结果表明了大分子单体的成功合成;随着NVP投料量的增加,交联共聚物膜的亲水性增强,水解降解性加快,而储能模量(E’)及玻璃化转变温度(Tg)下降;NVP与PLA-PEG-PLA大分子单体的投料量由0.25/1.68(质量比)增至1.55/1.68时,共聚膜的拉伸强度由32.7 MPa降为17.1 MPa,而断裂伸长率由82%增至387%,说明共聚物膜的韧性较好。

    Abstract:

    On the basis of synthesis of acrylate-terminated poly(lactide)-poly(ethylene glycol)-poly(lactide) (PLA-PEG-PLA) macromer, a series of PLA-PEG-PLA/PVP crosslinked copolymer films were prepared via photopolymerization of PLA-PEG-PLA macromer as crosslinker and N-vinylpyrrolidone (NVP). The structure of the macromer was confirmed by nuclear magnetic resonance (1H-NMR). With increase of the NVP amount incorporated, the hydrophilicity and hydrolytic degradation of the crosslinked copolmer films are improved, while the storage modulus (E’) and glass transition temperature (Tg) are decreased. Mechanical measurements show that the tensile strength of crosslinked copolymer films is decreased from 32.7 MPa to 17.1 MPa, while the elongation at break is increased from 82% to 387%, when the feed ratio of m(NVP)/m(PLA-PEG-PLA) macromer is changed from 0.25/1.68 to 1.55/1.68, indicating that copolymer films have high flexibility.

    参考文献
    相似文献
    引证文献
引用本文

高俊, 赵慧, 李利燕, 刘瑞娜, 赵三平.聚乳酸-聚乙二醇-聚乳酸/聚(N-乙烯基吡咯烷酮)交联共聚物膜的制备与性能[J].高分子材料科学与工程,2017,33(1):18-22. Jun Gao, Hui Zhao, Liyan Li, Ruina Liu, Sanping Zhao. Preparation and Properties of Poly(lactide)-Poly(ethylene glycol)-Poly(lactide)/Poly(N-vinylpyrrolidone) Crosslinked Copolymer Films[J]. Polymer Materials Science & Engineering,2017,33(1):18-22.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-01-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司