高折光紫外光-热双重固化树脂的合成及其性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

深圳市基础研究项目(JCYJ20150430163643495)


Preparation and Properties of High Refractive Index UV-Heat Curable Resins
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了同时具有光固化基团(双键)和热固化基团(环氧)的高折光紫外光-热双重固化树脂,用红外光谱、核磁共振氢谱、质谱表征了树脂结构。配制了一系列紫外光-热双重固化体系,用红外光谱表征了固化过程特征吸收峰的变化;测试了紫外光-热双重固化膜的凝胶率、吸水率、体积收缩率、折光率和表面水接触角。结果表明,高折光紫外光-热双重固化树脂固化后凝胶率可以达到 96.4%以上,吸水率在 0.87%以下,体积收缩率在 6.87%以下,水接触角在 60°左右,为亲水性表面。在相同稀释剂条件下,与双酚A环氧丙烯酸单酯光-热固化膜相比,其折光率由 1.3014提高到 1.5723。

    Abstract:

    High refractive index UV-heat double curable resins (CSEMA), with both UV-curable groups (C=C) and heat-curable groups (epoxy), were synthesized and characterized by FT-IR,1H-NMR,MS. A series of UV-heat curable systems were prepared, and the change of characteristic absorption peaks of the curing process was characterized by FT-IR. The gel content, water absorption, volume shrinkage, refractive index and water contact angle of UV-heat cured films were measured. The results indicate that the gel content of high refractive index UV-heat cured resins can reach 96.4%, the water absorption rate is below 0.87%, the volumetric shrinkage is below 6.87%, water contact angle is at about 60° for a hydrophilic surface. In the same diluents, compared to the bisphenol A epoxy monoacrylates (EMA) UV-heat curable systems, the refractive rate increases from 1.3014 to 1.5723.

    参考文献
    相似文献
    引证文献
引用本文

刘红波, 张武英, 林峰, 肖望东, 杨龙.高折光紫外光-热双重固化树脂的合成及其性能[J].高分子材料科学与工程,2017,33(1):23-27. Hongbo Liu, Wuying Zhang, Feng Lin, Wangdong Xiao, Long Yang. Preparation and Properties of High Refractive Index UV-Heat Curable Resins[J]. Polymer Materials Science & Engineering,2017,33(1):23-27.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-01-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司