长链丙烯酸酯共聚物乳液剥离剂的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51373091);陕西科技大学研究生创新基金


Preparation and Performance of Long Chain Acrylate Copolymer Emulsion Release Agent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸十八酯为主要单体,环己烷为溶剂,偶氮二异丁腈为引发剂,合成一种长链丙烯酸酯共聚物溶液。并以失水山梨糖醇脂肪酸酯(Span-80)/脂肪醇聚氧乙烯醚为复合乳化剂,将上述共聚物溶液制备成乳液。将聚合物乳液作为剥离剂加入天然乳胶,对比加入前后天然乳胶的表面张力、成膜时间、胶膜力学强度、吸水率及剥离强度等性能。结果表明,加入聚合物乳液作为剥离剂后,天然乳胶的表面张力由46.7 mN/m降低到37.2 mN/m。在25 ℃时成膜时间为15 h,平均拉伸强度可达4.225 MPa,断裂伸长率为940.120%,吸水率为12.82%,剥离强度降至0.32 kN/m。形成的乳胶薄膜在纸张表面可以完全剥离,且不损害纸纤维。

    Abstract:

    A long chain acrylate copolymer solution was prepared using octadecyl acrylate as main monomer, cyclohexane as solvent, azobisisobutyronitrile as initiator. The emulsion was also prepared based on the copolymer solution by using sorbitol fatty acid ester(Span-80)/ fatty alcohol ethoxylates as emulsifiers. The polymer emulsion was added to natural latex as release agent. The surface tension, forming time, film mechanical strength and water absorption properties of natural latex were all measured. The results show that after addition of polymer emulsion, the surface tension decreases from 46.7 mN/m to 37.2 mN/m. At 25 ℃, the film deposition time is 15 h, the average tensile strength is up to 4.225 MPa, the elongation at break 940.120%, and the water absorption 12.82%, the peel strength is down to 0.32 kN/m. The latex film formation can be completely peeled off the paper surface without any damage to paper fibers.

    参考文献
    相似文献
    引证文献
引用本文

武哲, 李小瑞, 马国艳, 曾湘楚.长链丙烯酸酯共聚物乳液剥离剂的制备及性能[J].高分子材料科学与工程,2017,33(1):44-49. Zhe Wu, Xiaorui Li, Guoyan Ma, Xiangchu Zeng. Preparation and Performance of Long Chain Acrylate Copolymer Emulsion Release Agent[J]. Polymer Materials Science & Engineering,2017,33(1):44-49.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-01-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司