Abstract:Microcellular polyethylene terephthalate (PET) was prepared via solid-bath foaming with high-pressure CO2 as blowing agent, and the influence of the crystallinity of PET solid on the cell morphology of the resultant foams was also investigated. First, PET specimens with various crystallinities were prepared via annealing method, and characterized by differential scanning calorimetry (DSC). The results reveal that the degree of crystallinity of PET resin increases from 8% for amorphous PET (APET) to 16% for crystalline PET after annealing at 110 ℃ for 10 min. Further increasing the time would lead to much higher crystallinity. After that, the as-prepared PET solids were foamed by a sudden increase of foaming temperature. Furthermore, the foaming behaviors of PET resin could also be manipulated by adjusting the saturation concentration of CO2 in PET matrix. SEM images of the resulting microcellular PET foams indicate that, with increase of the crystallinity of original PET solid, the PET foams exhibit a decreasing tendency in the cell sizes and an increasing density in the foam density. In addition, the cell size of the foams intends to increase at elevated foaming temperatures.