线型聚硅氧烷改性聚醚型聚氨酯/环氧树脂互穿聚合物网络
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(51203015);中国博士后科学基金(2014M551602);江苏省工业支撑(BE2014821);江苏省产学研前瞻项目(BY2014037-05,BY2015027-10,BY2015027-22);江苏省博士后基金资助(1401083B)


Linear Polysiloxane Modified Polyether Polyurethane/Epoxy Resin Interpenetrating Polymer Networks
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以端羟基聚硅氧烷(PDMS)、4,4,-二苯甲烷二异氰酸酯(MDI)、聚醚多元醇为原料制得端异氰酸酯基(-NCO)聚氨酯预聚体,再与环氧树脂E-44反应制得一系列聚硅氧烷改性聚氨酯/环氧树脂互穿聚合物网络。通过红外光谱、接触角、拉伸试验、动态力学分析、扫描电子显微镜对聚合物体系的结构与性能进行了研究和表征。实验结果表明,聚硅氧烷的引入使得互穿聚合物网络的表面疏水性增强,表面自由能降低,拉伸强度下降但断裂伸长率升高。随着聚硅氧烷用量的增加,聚合物体系的玻璃化转变温度从-45 ℃提高到了-36 ℃。

    Abstract:

    The polyurethane prepolymer terminated with isocyanate group was prepared with the terminal hydroxyl polysiloxane (PDMS), 4,4′-diphenyl methane diisocyanate(MDI)and polyether polyols. Then, a series of interpenetrating polymer networks(IPNs) were synthesized with the polyurethane prepolymer and epoxy resin(E-44). The structure and properties of polymers were studied and characterized by infrared spectroscopy (FT-IR), contact angle (WCA), tensile test, dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). Experimental results show that with the introduction of PDMS, the surface hydrophobicity and elongation of interpenetrating polymer networks are increased. The surface tension and tensile strength of IPNs are decreased.The glass transition temperature of polymer system is increased from -45 ℃ to -36 ℃ after the introduction of PDMS.

    参考文献
    相似文献
    引证文献
引用本文

余晨曦, 赵晨, 陈政翰, 朱静, 周金龙, 姜彦, 张嵘, 张洪文.线型聚硅氧烷改性聚醚型聚氨酯/环氧树脂互穿聚合物网络[J].高分子材料科学与工程,2017,33(1):125-129. Chenxi Yu, Chen Zhao, Zhenghan Chen, Jing Zhu, Jinlong Zhou, Yan Jiang, Rong Zhang, Hongwen Zhang. Linear Polysiloxane Modified Polyether Polyurethane/Epoxy Resin Interpenetrating Polymer Networks[J]. Polymer Materials Science & Engineering,2017,33(1):125-129.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-01-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司