利用可控层层自组装法提高纤维素膜的力学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

留学回国人员科研启动基金(教外司留[2013]693号);中国博士后科学基金(面上项目 2015M581723);江苏省自然科学基金青年基金(BK20140145);河北省自然科学基金青年科学基金(B2013210032);齐鲁工业大学制浆造纸科学与技术教育部重点实验室开放基金(08031343);华南理工大学制浆造纸工程国家重点实验室开放基金(201473);江苏高校优势学科建设工程资助项目(A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD))


Improving the Mechanical Strength of Cellulose Membrane Through Controllable Layer-by-Layer Self-Assembly
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过水溶性耦合试剂N-(3-二甲氨基丙基)-N′-乙基碳二亚胺盐酸盐(EDC)/N-羟基琥珀酰亚胺(NHS)将小分子4-羧基苯硼酸(PBA)与壳聚糖以形成酰胺键的方式结合起来,成功制备了苯硼酸官能团接枝的改性壳聚糖,随后将其与聚乙烯醇(PVA)通过pH值可控的层层自组装方法处理再生纤维素膜表面,得到力学强度明显改善的纤维素膜材料。结果表明:在pH为9.5,自组装30层高分子膜时,再生纤维素膜的拉伸强度与伸长率可提高38%和43%。处理后的再生纤维素膜达到了较为理想的力学性能增强效果,本方法对于纤维制品的性能改善有一定的应用价值。

    Abstract:

    Water-soluble coupling reagent N-(3-dimethylaminopropyl)-N′ -ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) were used to graft 4-carboxyphenylboronic acid onto chitosan by generating amide bonds to prepare modified chitosan containing phenylboronic acid functional groups. Subsequently, both of the modified chitosan and poly(vinyl alcohol) (PVA) were used to treat the regenerated cellulose membrane surface through controllable layer-by-layer self-assembly to improve the mechanical strength. The results show that the mechanical strength of the regenerated cellulose membrane reaches the optimal enhancement effect. When the layer number of the polymer self-assembly film is 30 at pH 9.5, the tensile strength and tensile stretch of the regenerated cellulose membrane are improved by 38% and 43%, respectively. Hence, the method mentioned has a potential application in modifying mechanical properties of fiber products.

    参考文献
    相似文献
    引证文献
引用本文

余光华, 张丹, 石贺丹, 龙柱, 董翠华, 王斌.利用可控层层自组装法提高纤维素膜的力学性能[J].高分子材料科学与工程,2017,33(2):67-71. Guanghua Yu, Dan Zhang, Hedan Shi, Zhu Long, Cuihua Dong, Bin Wang. Improving the Mechanical Strength of Cellulose Membrane Through Controllable Layer-by-Layer Self-Assembly[J]. Polymer Materials Science & Engineering,2017,33(2):67-71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-02-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司