水溶性聚酯硅钢片漆超声制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Performance of Water-Soluble Polyester Electrical Coating Prepared by Ultrasonic Irradiation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以水溶性聚酯树脂和氨基树脂为主要原料,通过超声波处理,制备水溶性聚酯硅钢片漆。通过对硅钢片漆的力学性能、绝缘性能和固化速度的分析,确定氨基树脂的最佳用量为20%(质量分数)。通过对超声波改性后硅钢片漆的力学性能、绝缘性能、表面粗糙度和固化速度的分析,研究了不同的超声时间对硅钢片漆性能的影响,确定超声波改性的最佳时间为5 h,此时硅钢片漆性能不受超声波改性的影响,硅钢片漆的固化过程更加平稳,同时表面粗糙度降低。

    Abstract:

    The water-soluble electrical coating was comprised with water-soluble polyester and amino resin, and modified by ultrasound. The best content of amino resin is 20% by the analysis of coating electrical, mechanism performance and curing speed tested by DEA. The coating electrical, mechanism performance and curing speed were also analyzed to check the effect of ultrasonic modification. The results indicate that the surface roughness of the coating film tested by AFM decreases as the modified time is 5 h, and other performances are not changed.

    参考文献
    相似文献
    引证文献
引用本文

张笑瑞, 罗学禹, 刘立柱, 翁凌.水溶性聚酯硅钢片漆超声制备及性能[J].高分子材料科学与工程,2017,33(2):137-141. Xiaorui Zhang, Xueyu Luo, Lizhu Liu, Ling Weng. Performance of Water-Soluble Polyester Electrical Coating Prepared by Ultrasonic Irradiation[J]. Polymer Materials Science & Engineering,2017,33(2):137-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-02-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司