接枝改性白炭黑对溶聚丁苯橡胶裂纹生长行为的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目 (21404063);浙江省自然科学基金资助项目 (LQ14E030001); 宁波市自然科学基金资助项目 (2013A610024);宁波大学王宽诚幸福基金


Influence of Grafted Silica Particles on the Crack Growth Behavior of Solution Polymerized Butadiene Styrene Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    白炭黑是一种重要的橡胶填料,通过硅烷偶联剂改性,制备了不同接枝率白炭黑填充的溶聚丁苯橡胶。研究表明,接枝改性后白炭黑在橡胶基体中的分散得到改善,增强效果提升,裂纹生长速率随接枝率显著降低。进一步在动态载荷下对橡胶裂纹尖端进行正面观察其韧带生成、生长以及断裂的情况,发现随接枝率的提高,裂纹尖端韧带分布呈均匀化和细化的趋势。基于开裂形态与断裂面分析揭示了改性白炭黑填充溶聚丁苯橡胶抗裂纹生长能力提高的原因。

    Abstract:

    Silica is of vital importance in rubber industry. In this work, silane coupling agent grafted silica particles (MSilica) with different grafting amount were prepared. These MSilica were used to prepare MSilica filled butadiene styrene rubber (SSBR). Results indicate that better dispersion of silica is achieved by grafting modification. Meanwhile, a strong filler network is formed, which lead to increase of the modulus. As the grafting amount increases, the crack growth rate of MSilica/SSBR decreases markedly. By an original real-time monitoring method, the crack tip morphology of MSilica/SSBR was investigated. It is found that the ligaments on the crack tip become thinner and more homogeneous. Finally, the mechanism of the influence of grafting modified silica on the crack growth behavior was proposed.

    参考文献
    相似文献
    引证文献
引用本文

尹启彦, 王丽婷, 曹喜娟, 丁亚轩, 翁更生.接枝改性白炭黑对溶聚丁苯橡胶裂纹生长行为的影响[J].高分子材料科学与工程,2017,33(2):167-171. Qiyan Yin, Liting Wang, Xijuan Cao, Yaxuan Ding, Gengsheng Weng. Influence of Grafted Silica Particles on the Crack Growth Behavior of Solution Polymerized Butadiene Styrene Rubber[J]. Polymer Materials Science & Engineering,2017,33(2):167-171.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-02-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司