用以合成高剥离型天然橡胶复合材料有机蒙脱土的制备及应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21676150)


Preparation and Application of Organo Montmorillonite Synthesizing Exfoliated Natural Rubber Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成出一种端羟基阳离子水性聚氨酯树脂,采用超声波助混技术将其插层到蒙脱土中,通过阳离子交换制备出含有端羟基高剥离度的有机蒙脱土(HOMMT),并将HOMMT应用到天然橡胶(NR)复合材料中,研究其对天然橡胶复合材料力学性能的影响。采用傅里叶变换红外光谱(FT-IR)、广角X射线衍射(XRD)、热失重分析(TGA)、透射电镜等检测手段分别对HOMMT结构性能进行分析表征,并用材料拉伸机、阿克隆磨耗机测试HOMMT/天然橡胶复合材料的力学性能。XRD结果表明,改性后的蒙脱土层间距由原来的1.21 nm增加到6.29 nm。FT-IR和TGA表明端羟基阳离子水性聚氨酯树脂大分子链插层于蒙脱土层间。加入剥离型有机蒙脱土后,由于层状硅酸盐纳米粒子的存在,NR复合材料的力学性能得到提高,耐磨性提高约14%。

    Abstract:

    Na-MMT was exchanged with hydroxyl-terminated cationic waterborne polyurethane resin by ultrasonic assistant mixing technology, and the highly exfoliated organo montmorillonite(HOMMT) with hydroxyl groups was prepared by cation exchange process, and then the titled HOMMT was blended in natural rubber composites, and the effect of HOMMT on the abrasion resistance was studied. The structure and properties of HOMMT were characterized by FT-IR, XRD, TGA and TEM. The mechanical properties of HOMMT/NR composites were determined by strain-stress machine and Akron abrasion machine. The result of XRD shows that the interlayer space of HOMMT increases from 1.21 nm to 6.29 nm. The results of FT-IR and TGA show that the macromolecules chain of HCWPU is present between MMT layers, and because of presence of the silicate nanolayers, thus, the mechanical properties of HOMMT/NR composites are improved. The abrasion resistance is enhanced by 14% compared with the pristine natural rubber.

    参考文献
    相似文献
    引证文献
引用本文

李再峰, 罗明艳, 蒋玉湘, 张浩洋, 周京福.用以合成高剥离型天然橡胶复合材料有机蒙脱土的制备及应用[J].高分子材料科学与工程,2017,33(3):1-5. Zaifeng Li, Mingyan Luo, Yuxiang Jiang, Haoyang Zhang, Jingfu Zhou. Preparation and Application of Organo Montmorillonite Synthesizing Exfoliated Natural Rubber Composites[J]. Polymer Materials Science & Engineering,2017,33(3):1-5.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-03-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司