降冰片烯-2,3-二羧酸酯类内给电子体对Ziegler-Natta催化剂催化1-丁烯聚合的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目( 51373046,21004017);河北省自然科学基金资助项目(B2014202013,B2015202049);中国石油股份有限公司技术开发项目


1-Butene Polymerization over MgCl2-supported Ziegler-Natta Catalysts Containing Diethyl Norbornene-2, 3-dicarboxylate Internal Electron Donor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了3种顺-5-降冰片烯-内-2,3-二羧酸酯类内给电子体,考察了内给电子体空间位阻对催化剂催化1-丁烯於浆聚合的影响。实验结果表明,当外给电子体为二异丁基二甲氧基硅烷时,以顺-5-降冰片烯-内-2,3-二羧酸二甲酯为内给电子体制备的催化剂催化得到的聚丁烯相对分子质量最大,为98.1×104,相对分子质量分布最宽(PDI=5.6)。就提高催化剂活性而言,顺-5-降冰片烯-内-2,3-二羧酸二乙酯内给电子体更有优势。此外,对比考察顺-双环[2,2,1]-庚-内-2,3-二羧酸二乙酯内给电子体对催化剂催化性能影响发现,降冰片烯环上双键的还原大大降低了催化剂的活性。

    Abstract:

    Three cis-5-Norbornene-endo-2,3-dicarboxylic acid esters were synthesized and employed as internal electron donor (IED) of Ziegler-Natta catalysts, and 1-butene polymerizations were performed under these catalysts prepared. It is found that PB obtained by catalyst containing cis-5-norbornene-endo-2, 3-dicarboxylic acid dimethyl ester as IED and diisobutyldimethoxysilane as external electron donor, possess the largest Mw (98.1×104), the narrowest PDI (5.6), and the highest isotacticity (97.0%), while the activity of catalyst employed cis-5-norbornene-endo-2, 3-dicarboxylic acid diethyl ester as IED is much higher compared with others. What is more, the performance of the cis-5-norbornene-endo-2, 3-dicarboxylic acid ester-based Ziegler-Natta catalysts is much better in catalyst activity than the Ziegler-Natta catalyst containing cis-bicyclo [2.2.1] hept-endo-2, 3-dicarboxylic acid diethyl ester as IED.

    参考文献
    相似文献
    引证文献
引用本文

董小芳, 崔晓鹏, 杨敏, 刘宾元.降冰片烯-2,3-二羧酸酯类内给电子体对Ziegler-Natta催化剂催化1-丁烯聚合的影响[J].高分子材料科学与工程,2017,33(3):25-29. Xiaofang Dong, Xiaopeng Cui, Min Yang, Binyuan Liu.1-Butene Polymerization over MgCl2-supported Ziegler-Natta Catalysts Containing Diethyl Norbornene-2, 3-dicarboxylate Internal Electron Donor[J]. Polymer Materials Science & Engineering,2017,33(3):25-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-03-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司