热塑增韧环氧树脂体系的黏温特性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家高技术研究发展计划(2015AA03A204)


Viscosity-Temperature Characteristics of Epoxy Resin System Toughened by Thermoplastic Particles
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用增韧用热塑性塑料粉料与常用环氧树脂的共溶和共混物的黏温特性进行研究。研究表明,溶解于环氧树脂中的热塑性塑料粉料是环氧树脂体系基础黏度的主要贡献源,不同的热塑性塑料粉料在环氧树脂中的溶解特性具有显著不同的特点,环氧树脂/热塑性塑料粉料共混物也可以获得最低黏度,但不如共溶物显著,共混物黏度的提高主要表现为升温过程中热塑性塑料粉料在环氧树脂中的物理溶解。采用共混方法和共溶方法都可对环氧树脂/热塑体系的黏温特性进行有效调控。

    Abstract:

    The viscosity-temperature characteristics of solution and mixture of common epoxy and toughening thermoplastic particles were investigated. The results show the thermoplastic particles dissolved in epoxy mainly provid the foundational viscosity of epoxy resin system. Different thermoplastic particles show different solution characteristic in epoxy. The mixture of thermoplastic particle in epoxy could increase the minimum viscosity of resin system, though the effect is less obvious than the solution system of thermoplastic and epoxy. The toughening thermoplastic particles are solved gradually in epoxy with the increasing of test temperature, then the viscosity increases. The viscosity-temperature characteristics of epoxy/thermoplastic could be adjusted efficiently by solution and mixture.

    参考文献
    相似文献
    引证文献
引用本文

钟翔屿, 包建文, 张代军, 张连旺.热塑增韧环氧树脂体系的黏温特性[J].高分子材料科学与工程,2017,33(3):71-77. Xiangyu Zhong, Jianwen Bao, Daijun Zhang, Lianwang Zhang. Viscosity-Temperature Characteristics of Epoxy Resin System Toughened by Thermoplastic Particles[J]. Polymer Materials Science & Engineering,2017,33(3):71-77.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-03-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司