Abstract:A thermal reflective coating based on silica-sol and pure acrylic emulsion was studied. The research results show that the proportion of silica-sol is helpful to improve solar reflectance and solar reflecting after pollution, and the contact angle of water on the surface of the coating gradually increases. The best scheme of silica-sol proportion(10~15 nm), silica sol and acrylate emulsion ratio(5∶4) and the content of silane coupling agent(4%) is verified by orthogonal experiment. The effect of the type and content of titanium dioxide on the thermal reflective performance of the coating was studied. The solar reflectance and near infrared reflectance, as well as properties of thermal-insulation of the coating are improved by using the modified TiO2. The radiation and thermal-insulation properties of the coating affected by particle size and content of the radiation filler were also studied. When the particle size is 1.05 μm and the dosage is about 8%, the hemispherical emissivity of the coating reaches the maximum. Finally, a stain resistant with high radiation and reflection ability of inorganic-organic composite thermal reflective coating was prepared.