Abstract:To understand the effect of solvent on molecular structures and optoelectronic properties of poly(3,4-ethylenedioxythiophene) (PEDOT) synthesized in EDOT solution by liquid phase depositional polymerization and explore alternative for indium tin oxid(ITO) flexible transparent conductive film, polyethylene terephthalate (PET) film with adsorbed Fe(OTs)3 was suspended in EDOT acetonitrile/ cyclohexane solutions and PEDOT coating was synthesized on PET film in situ at 60 ℃. The synthesized PEDOT coatings were characterized by FT-IR, UV-vis and XPS spectroscopes and the sheet resistances were measured by four-point probe. The effect of acetonitrile content on molecular structures and optoelectronic properties was investigated. In EDOT solution, acetonitrile increases the absorbance of EDOT and exhibit strong solvating ability. The conjugative defects, doping levels and optoelectronic properties of synthesized PEDOT coating vary with acetonitrile content. At volume fraction of 0.05%, added acetonitrile depresses the short conjugative chains and enhances the doping level, thereby, reduces the sheet resistance and enhances the transmittance. The sheet resistance decreases with the acetonitrile volume fraction till 0.24%. As the acetonitrile content is above 0.7%, the short conjugative chains increases and sheet resistance rebounds. In EDOT solution with 8% of acetonitrile, the adsorbed Fe(OTs)3 would escape from the stagnant layer and is not able to synthesize PEDOT coating on PET film. At the acetonitrile volume fraction of 0.24%, a PEDOT/PET film with the sheet resistance 174 Ω and transmittance 80% could be prepared by liquid phase depositional polymerization in EDOT acetonitrile/cyclohexane solution.