苯乙烯-丙烯酸甲酯共聚物对聚苯乙烯/聚乳酸共混物力学性能和流变性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51173039,51303049)


Effect of Poly(Stylene co Methyl Acrylate) on Mechanical and Rheological Properties of Polystyrene/Poly(lactic acid) Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用无皂乳液聚合法合成了苯乙烯-丙烯酸甲酯共聚物(PSMA)(n(St)∶n(MA)=75∶25),将PSMA与聚苯乙烯(PS)和聚乳酸(PLA)熔融共混制备了PSMA含量不同的PS/PLA共混物(m(PS)∶m(PLA)=1∶4),利用扫描电子显微镜、电子拉力机和转矩流变仪对共混物的相结构、力学性能以及流变行为进行了表征。结果表明,加入少量PSMA即能有效提高PLA与PS的相容性,减小PS/PLA共混物中分散相的相尺寸,提高PLA与PS两相间粘接作用;加入质量分数为0.5%的PSMA时,PS/PLA共混物的力学性能达到最佳;未加PSMA时,PS/PLA共混物在高剪切速率下剪切变稀显著,甚至低于纯PS,加入PSMA后,在高剪切速率下的剪切变稀程度与纯PLA相当。

    Abstract:

    Surfactant-free emulsion polymerization was used to synthesize poly(styrene-ran-methyl acrylate) (PSMA) at the mole ratio of styrene/(methyl acrylate) 75/25, which, at different contents, was then melt-blended with a polystyrene (PS)/poly(lactic aicd) (PLA) tumble-mixture (mass ratio of 1/4) to prepare PSMA-modified PS/PLA blends, of which the phase morphology, mechanical properties and rheological behavior were characterized through scanning electron microscopy (SEM), tensile testing and rotational rheometry, respectivelye. It is revealed that addition of a small amount of PSMA effectively improves the compatibility and thus the interfacial adhesion of the PS/PLA blend, thereby reducing the size of the PS dispersed phase; there exist an optimum PSMA-content of ~0.5% that gives rise to the maximum mechanical properties of the PS/PLA blend. At high shear rates, the PS/PLA blend exhibits a significant shear-thinning behavior in absence of the PSMA modifier, with its melt viscosity even lower than that of the neat PS, while the extent of shear-thinning is comparable to that of the neat PLA upon incorporation of PSMA.

    参考文献
    相似文献
    引证文献
引用本文

高翔, 王敏, 陈业煌, 胡涛, 王小涛, 吴崇刚, 龚兴厚.苯乙烯-丙烯酸甲酯共聚物对聚苯乙烯/聚乳酸共混物力学性能和流变性能的影响[J].高分子材料科学与工程,2017,33(4):69-75. Xiang Gao, Min Wang, Yehuang Chen, Tao Hu, Xiaotao Wang, Chonggang Wu, Xinghou Gong. Effect of Poly(Stylene co Methyl Acrylate) on Mechanical and Rheological Properties of Polystyrene/Poly(lactic acid) Blends[J]. Polymer Materials Science & Engineering,2017,33(4):69-75.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司