Abstract:The gel system was prepared by mixing partially hydrolyzed polyacrylamide (HPAM) with chromium chloride (CrCl3), using macroscopic viscosity index (MVI) and the elasticity index (EI) as main evaluation index, and the optical micro rheometer was employed to evaluate the micro-rheological properties at various concentrations of cross-linking agent, pH, temperature and NaCl concentration. With increase of the cross-linking agent concentration and the temperature increases, initial gel time of dynamic gelling decrease, MVI and EI both increase, the gel strength increases as well. The gel system displays the best stability at pH=7. The initial gel time decreases in weak alkaline environment; however, MVI and EI decrease and the gel strength decreases. While the initial gel time decreases in acidic conditions, thus, shrinking of network structure and broken plastic occurr. As the NaCl concentration increases, the initial gel time gets shorter, the MVI and EI decrease, and the gel strength decreases. It is found that the results of micro rheometer are consistent with the conventional method. In addition, based on the micro-structure characterization of the chromium gel system and the results of micro rheological test, a new method of in-situ measurement of the process of dynamic gelling and gel strength is established.