Abstract:Amphiphilic triblock copolymers with PP as lipophilic chain and polyethylene glycol(PEG), polymethyl methacrylate(PMMA), polyvinyl pyrrolidone(PVP), polyhydroxyethyl mathacrylate(PHEMA) as hydrophilic chains were synthesized, and used to modify surface properties of PP films. Fourier transform infrared spectroscopy (FT-IR), contact angle tester and atomic force microscope (AFM) were used to characterize surface compositions, morphologies and hydrophilicities of the films, and compare loadings of different hydrophilic chains on surface of PP films. It is found that, with the same contents of hydrophilic chains in films, the migration rates and concentrations of hydrophilic chain on the film surface are followed this order: PEG chains > PVP chains > PHEMA chains > PMMA chains. Hydrophilic chains would gather and then form microdomains on the surface of films modified with amphiphilic triblock copolymers. The order of distribution densities of these microdomains is the same as the order of concentrations of hydrophilic chains on the film surface. Among the four amphiphilic copolymers, the amphiphilic copolymer with PEG as hydrophilic chain demonstrates the best modification effect, due to the highest concentration of PEG chains gathering on the film surface, while the amphiphilic copolymer with PMMA as hydrophilic chain shows the poorest effect because the concentration of PMMA chains on the surface of modified film is very low.