聚乙烯醇/纤维素纳米纤热塑性复合材料的制备及表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51473100)


Preparation and Characterization of Poly (vinyl alcohol)/Cellulose Nanofibrils Thermoplastic Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将聚乙烯醇(PVA)、纤维素纳米纤(CNFs)通过熔融共混成功制备出高性能PVA/CNFs热塑性复合材料。采用扫描电镜、红外光谱、X射线衍射、差示扫描量热分析、热重分析对PVA/CNFs复合材料的微观形态及结构进行表征,对复合材料的物理力学性能进行测试。结果表明,选用适当的增塑剂与PVA、CNFs组合可实现 PVA/CNFs共混体系的热塑成型;CNFs与PVA间的氢键作用有助于提高CNFs与PVA基体之间的相容性,从而优化PVA/CNFs复合材料的力学性能,拉伸强度从19.5 MPa增加到34.3 MPa,弹性模量从114.4 MPa增加到287.5 MPa。

    Abstract:

    The poly (vinyl alcohol)/cellulose nanofibrils(PVA/CNFs) thermoplastic composites were successfully prepared by melt processing. SEM, FT-IR, XRD, DSC, TGA were applied to investigate the structure and properties of the composites. The mechanical properties of the composites were evaluated. Experimental results show that PVA/CNFs composites could be thermoplasticly processed with appropriate plasticizers. CNFs could form hydrogen bonds with PVA, which improve the interfacial compatibility of PVA/CNFs composites. The PVA/CNFs composites exhibit better mechanical properties. The tensile strength increases from 19.5 MPa to 34.3 MPa, while the elastics modulus increases from 114.4 MPa to 287.5 MPa.

    参考文献
    相似文献
    引证文献
引用本文

肖梅杰, 张伟, 卢灿辉.聚乙烯醇/纤维素纳米纤热塑性复合材料的制备及表征[J].高分子材料科学与工程,2017,33(4):121-125. Meijie Xiao, Wei Zhang, Canhui Lu. Preparation and Characterization of Poly (vinyl alcohol)/Cellulose Nanofibrils Thermoplastic Composites[J]. Polymer Materials Science & Engineering,2017,33(4):121-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司