Abstract:Molecularly imprinted membranes which can operate in a continuous way exhibit advantages of the membrane separation technology and molecule imprinting technique. However, during synthesis of molecularly imprinted membranes, the presence of cross linker would make the membranes have poor flexibility and low mechanical strength, the easily deformed shape complementary to the template and the instability of functional groups in the separation process of molecularly imprinted membranes would reduce the separation efficiency. Consequently, it is difficult to apply under the pressure of traditional ultrafiltration membrane separation. Ferulic acid composite molecularly imprinted membranes with nanoparticles were developed by UV-situ polymerization on the surface of polyvinilidene fluoride (PVDF) membranes. The structure and morphology of membranes were characterized through Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). Results show that nanoparticles are pure physical blending, and they are all scattered around holes to help maintaining pore structure. The separation performance and water flux of prepared membranes were evaluated by the cross flow membrane filtration equipment. As a result, the modified membranes blending with 0.5% 18nm TiO2 have the best properties, with the mechanical capacity more than 0.4 MPa, the separation factor about 3.4, the water flux of 6696 L/(m2·h).