动态硫化法制备尼龙6/马来酸酐接枝三元乙丙橡胶高韧合金
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目 (51372059)


Preparation and Properties of PA6/EPDM-g-MAH Alloys with High-Toughness via Dynamic Vulcanization Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用酚醛树脂(PF)、硫磺(S)与过氧化二异丙苯(DCP)作交联剂,研究了马来酸酐接枝三元乙丙橡胶(EPDM-g-MAH)的动态硫化对增韧尼龙6(PA6)性能的影响。结果表明,采用PF硫化体系且硫化剂用量为EPDM-g-MAH 的1.5%,PA6与EPDM-g-MAH质量比为80/20的合金的综合性能较好,其拉伸强度与缺口冲击强度较未硫化PA6/EPDM-g-MAH(80/20)合金分别提高69.5%与128.8%,主要是由于动态硫化提高了PA6与EPDM-g-MAH的相容性。动态硫化还提高了PA6/EPDM-g-MAH合金的热稳定性、PA6的结晶温度和结晶速率。

    Abstract:

    Using phenolic resin (PF), sulfur (S) and dicumyl peroxide (DCP) as crosslinking agent, the effects of dynamic vulcanization of maleic anhydride grafted ethylene-propylene-diene rubber (EPDM-g-MAH) on properties of nylon 6 (PA6) were studied. The results show that the dynamically vulcanized PA6/EPDM-g-MAH (80/20) blend with PF curing system and the curing agent content of 0.3% possesses superior properties. The tensile strength and notched impact strength of this blend are higher than those of unvulcanized PA6/EPDM-g-MAH (80/20) blend by 69.5% and 128.8%, respectively, which is due to the improved compatibility between PA6 and EPDM-g-MAH via dynamic vulcanization. Moreover, the thermal stability of PA6/EPDM-g-MAH blends, crystallization temperature and crystallization rate of PA6 are also improved because of dynamic vulcanization.

    参考文献
    相似文献
    引证文献
引用本文

郭知理, 赵凡, 姜茜茜, 陈婉, 唐龙祥.动态硫化法制备尼龙6/马来酸酐接枝三元乙丙橡胶高韧合金[J].高分子材料科学与工程,2017,33(4):137-142. Zhili Guo, Fan Zhao, Xixi Jiang, Wan Chen, Longxiang Tang. Preparation and Properties of PA6/EPDM-g-MAH Alloys with High-Toughness via Dynamic Vulcanization Method[J]. Polymer Materials Science & Engineering,2017,33(4):137-142.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司