多孔再生纤维素/聚乳酸复合材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51273131,51473101)


Fabrication and Mechanical Properties of Porous Materials Formed by Regenerated Cellulose with Poly(lactic acid)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过简易、绿色环保的方法,将纤维素用NaOH/尿素体系进行溶解、再生、冷冻干燥获得再生纤维素(RC)多孔材料,再浸渍聚乳酸(PLA)获得多孔RC/PLA复合材料。该复合材料具有与多孔RC材料相同的开孔结构,超轻,高孔隙率等特性。随PLA的引入,多孔复合材料的三维纤维网络结构向密实片层结构转变,缺陷结构逐渐完善,其压缩强度大幅度提高。RC/PLA的压缩强度和模量相比于RC分别提高了369.8%和633.6%。

    Abstract:

    The porous regenerated cellulose (RC) materials were fabricated via simple and environmentally friendly NaOH/urea/H2O solvent to dissolve cellulose followed by regeneration and freeze-dry. And the porous regenerated cellulose/poly(lactic acid) (RC/PLA) composites were obtained by immersing porous RC materials in impregnation solution of PLA. Similar to porous RC materials, porous RC/PLA composites have the same properties with open porous structure, ultra-light and high porosity. And the compressive strength and elastic modulus of porous RC/PLA composites are 369.8% and 633.6% higher than those of porous RC materials, respectively, due to the morphology of porous structure transition from 3D fibrillar network to close-grained sheet network and the defective porous structure is repaired with the PLA loading.

    参考文献
    相似文献
    引证文献
引用本文

滕健, 张亮青, 林胜强, 唐建华, 钟淦基, 李忠明.多孔再生纤维素/聚乳酸复合材料的制备与性能[J].高分子材料科学与工程,2017,33(4):143-147. Jian Teng, Liangqing Zhang, Shengqiang Lin, Jianhua Tang, Ganji Zhong, Zhongming Li. Fabrication and Mechanical Properties of Porous Materials Formed by Regenerated Cellulose with Poly(lactic acid)[J]. Polymer Materials Science & Engineering,2017,33(4):143-147.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司