Abstract:The cationic exchange layers of the carboxymethyl cellulose (CMC)- polyvinyl alcohol (PVA) /chitosan (CS) -polyvinyl alcohol bipolar membranes (BPM) using glutaraldehyde as crosslinker and ferric chloride as modifier, were modified by multi-walled carbon nanotubes (MWCNTs), hydroxylated multi-walled carbon nanotubes (MWCNTs-OH), carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) and sulfonated multi-walled carbon nanotubes (MWCNTs-SO3H), respectively. The mechanical properties, contact angle and electric current density-cell voltage curve as well as the Fe3+ loss amount of the CMC-PVA/CS-PVA BPMs before and after modification were compared. The experimental results show that after modification by functionalized multi-walled carbon nanotubes, both the hydrophilicity and mechanical properties of the bipolar membrane are significantly improved. The functionalized multi-walled carbon nanotubes and Fe3+ have a synergistic effect on promoting water splitting in the intermediate layer, thus the water splitting efficiency is greatly improved, and the membrane impedance and cell voltage of bipolar membrane are reduced. In addition, functionalized multi-walled carbon nanotubes existed in the bipolar membrane are beneficial for retention rate of Fe3+ in BPMs during electrolysis, and then to maintain the stability of the structure and catalytic performance for water splitting of the BPMs.