基于电诱导沉积方法制备海藻酸钙水凝胶
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(61573238);国家科技支撑计划资助项目(2015BAF10B01);上海市自然科学基金资助项目(13ZR1415800);江苏省先进机器人技术重点实验室基金(JAR201304)


Preparation of Calcium Alginate Hydrogel Based on Electro Induced Deposition Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    海藻酸钙水凝胶是一种具有良好生物相容性、生物降解性的生物医用高分子材料,但是传统制备方法不能得到具有生理结构的水凝胶。文中提出了一种基于电诱导沉积原理,使用海藻酸钠和碳酸钙混合溶液制备海藻酸钙水凝胶的方法。在分析电诱导沉积原理基础上,搭建了海藻酸钙水凝胶3D打印系统。建立了海藻酸钙水凝胶截面宽度模型,提出了通过调节打印喷头的移动速度控制凝胶截面宽度的方法。应用该系统打印了圆管形、正六边形及四叶草形的生物支架,并用这些结构的生物支架进行细胞培养实验,获得具有一定生物活性的细胞。

    Abstract:

    Calcium alginate hydrogel is a kind of well biocompatible and biodegradable biomedical polymer material. However, traditional preparation methods cannot obtain hydrogel with physical structure. This paper proposed a method which made use of mixed solution of sodium alginate and calcium carbonate as raw material for the preparation of calcium alginate hydrogel based on the principle of electrically induced deposition. On the basis of analyzing electrically induced deposition. This paper built a calcium alginate hydrogel 3D printing system, established a model of cross-sectional width for calcium alginate hydrogel, and put forward the method of controlling the gel-sectional width by adjusting the speed of the print head. This paper also adopted the system to print pipe shaped, hexagonal and clover-shaped bio-scaffold structure which can be used for cell culture experiments in which biological activated cell can be obtained.

    参考文献
    相似文献
    引证文献
引用本文

陈韦男, 马立, 高海洲, 陈涛, 杨湛.基于电诱导沉积方法制备海藻酸钙水凝胶[J].高分子材料科学与工程,2017,33(4):154-159. Weinan Chen, Li Ma, Haizhou Gao, Tao Chen, Zhan Yang. Preparation of Calcium Alginate Hydrogel Based on Electro Induced Deposition Method[J]. Polymer Materials Science & Engineering,2017,33(4):154-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司