基于塑料微挤出成型的熔融沉积成型技术表面粗糙度研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21464010);江西省重点研发计划(20161BBG70046)


Surface Roughness of Fused Deposition Modeling Based on Micro-Extrusion: A Review
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    熔融沉积成型技术(FDM)是一种无模成型技术,易实现复杂模型的个性化定制,使得它在航空、汽车、医疗行业具有广泛、潜在的应用。同时FDM打印也是一种逐层打印技术,但制件表面粗糙,限制了它的应用。文中回顾了近10年来,尤其是近3年来在改进FDM表面粗糙度方面的研究现状和进展,并从制件后处理、软件控制、数学模型预测、优化工艺参数及结合其它成型技术等多方面论述了国内外关于FDM打印件表面粗糙度的改进方法及研究进展。

    Abstract:

    Fused deposition modeling(FDM) is a solid free forming technology for various engineering application. Due to its ability to produce complex geometrical parts for personalized customization, it has wide potential application in aviation, automotive and medical industry. However, poor surface roughness of fabricated objects is the big issue that restricts its application because FDM uses a layer-based approach. In this paper, the current situation and investigation about surface roughness of FDM over the past ten years were reviewed, especially the recent three years, and introduced some main methods on how to reduce it from the following aspects, such as the post processing, software control, mathematical model prediction, optimization of process parameters and other processing techniques.

    参考文献
    相似文献
    引证文献
引用本文

肖建华, 高延峰, 陈思维, 周友明, 钟卫.基于塑料微挤出成型的熔融沉积成型技术表面粗糙度研究进展[J].高分子材料科学与工程,2017,33(4):160-167. Jianhua Xiao, Yanfeng Gao, Siwei Chen, Youming Zhou, Wei Zhong. Surface Roughness of Fused Deposition Modeling Based on Micro-Extrusion: A Review[J]. Polymer Materials Science & Engineering,2017,33(4):160-167.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-04-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司