Abstract:The fluorinated diol was prepared from dodecafluoroheptyl methacrylate ester (DFHMA) and diethanolamine (DEOA), NCO-terminated linear polyurethane prepolymer which was prepared from isophorone diisocyanate (IPDI), polycarbonate glycol (PCDL), hydroxyl-terminated polybutadiene (HTPB), fluorinated diol and pentaerythritol triacrylate (PETA), then, the fluorinated diol and hydroxyl-terminated polybutadiene modified hyperbranched UV curable polyurethane (FHPU) was prepared via copolymerization of dipentaerythritol (Di-PE) and polyurethane prepolymer. Using FT-IR and 1H-NMR to characterize the polymer, and the effect of different fluorinated diol and hydroxyl-terminated polybutadiene content on water contact angle, bibulous rate, the thermal resistance, hardness and mechanical property of the films were studied. The results show that with addition of the fluorinated diol and hydroxyl-terminated polybutadiene, the water contact angle of the films is improved and the bibulous rate is substantially decreased, thermal performance and hardness of the films are enhanced. While the mass fraction of fluorinated diol and hydroxyl-terminated polybutadiene is 8% and 20% respectively, the film shows the best properties.