异氰尿酸三缩水甘油酯对聚对苯二甲酸乙二醇结构和性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Structural and Performance of Poly(ethylene terephalate) Modified by Triglycidylisocyanurate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以异氰脲酸三缩水甘油酯(TGIC)为扩链剂,采用熔融共混法制备扩链聚对苯二甲酸乙二醇酯(CEPET)。使用乌氏黏度计测量其特性黏数([η]),滴定法测定其端羧基(CV)的含量,使用旋转流变仪和差示扫描量热仪对扩链PET的流变和结晶性能进行分析。当TGIC的添加量为1.0 phr时,[η]=0.93 dL/g;当TGIC的添加量为1.4 phr时,CV=6.2 mol/L。当TGIC的添加量为1.0 phr时,损耗模量和储存模量的最大值分别为19500 Pa和28800 Pa。随着TGIC添加量的增加,结晶度和结晶温度先下降后上升,最低值分别为25.5%和181 ℃,半结晶时间先延长后缩短,最大值为1.8 min。

    Abstract:

    Triglycidyl isocyanurate (TGIC) was chosen as chain extender, chain extended poly(ethylene terephthalate)(CEPET) was reacted via melt blending. The intrinsic viscosity([η]) of CEPET was measured by ubbelohde viscometer and terminal carboxyl group(CV) was measured by titration. Performances of rheological and crystallization were characterized by rotational rheometer and differential scanning calorimeter(DSC) respectively. The results reveal that [η] of 0.93 dL/g for 1.0 phr TGIC and CV of 6.2 mol/kg for 1.4 phr TGIC. Storage modulus and loss modulus are approached to 19500 Pa and 28800 Pa with 1.0 phr TGIC added. With increase of the TGIC content, the crystallinity and crystallization temperature rise after drop, the lowest value is 25.5% and 181 ℃ respectively; the crystallization half time decreases after increases and the maximum value is 1.8 min.

    参考文献
    相似文献
    引证文献
引用本文

耿加露, 陶国良, 夏艳平, 顾艺, 戴舒天.异氰尿酸三缩水甘油酯对聚对苯二甲酸乙二醇结构和性能的影响[J].高分子材料科学与工程,2017,33(5):55-60. Jialu Geng, Guoliang Tao, Yanping Xia, Yi Gu, Shutian Dai. Structural and Performance of Poly(ethylene terephalate) Modified by Triglycidylisocyanurate[J]. Polymer Materials Science & Engineering,2017,33(5):55-60.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-05-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司