聚丙烯酸铅/三元乙丙橡胶复合材料的制备及辐射防护性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金委员会-中国工程物理研究院联合基金资助项目(U1530102); 高分子材料工程国家重点实验室开放课题基金(sklpme2016-4-33)


Preparation and Radiation Shielding Property of Poly-Lead Acrylate/Ethylene-Propylenediene Rubber Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用氧化铅(PbO)与丙烯酸(HAA)经偶氮二异丁腈引发合成聚丙烯酸铅,以过氧化物为硫化体系制备了聚丙烯酸铅/三元乙丙橡胶复合材料,采用傅里叶变换红外光谱仪、X射线衍射谱仪和扫描电镜对其结构进行了分析。利用材料万能试验机测量了复合材料的拉伸强度和断裂伸长率,用邵氏硬度计测量了硬度,以及高纯锗伽马能谱仪测量了屏蔽性能。结果表明,复合材料的拉伸强度和硬度随着聚丙烯酸铅粉体含量的增加而增加;断裂伸长率随着聚丙烯酸铅粉体含量的增加而降低。复合材料对于γ射线的质量衰减系数,随着聚丙烯酸铅粉体含量的增加而提高。

    Abstract:

    Poly-lead acrylate was synthesized by azobisisobutyronitrile initiating the product of lead oxide and acrylic acid, and the poly-lead acrylate/ethylene-propylenediene rubber (EPDM) composites were prepared using peroxide as curing agent. The composites were characterized and analyzed by FT-IR, XRD, and SEM. Then the tensile strength and elongation at break were measured by universal testing machine, the hardness was tested by Shore hardness tester, and the shielding performance was measured by high purity germanium gamma spectrometer. The results show that the tensile strength and hardness of the composites are increased with increasing of the filler content, and the elongation at break is decreased with increasing of the filler content. The mass attenuation coefficient of the composites for γ-ray is improved with increasing of the filler content.

    参考文献
    相似文献
    引证文献
引用本文

马权, 杨文彬, 张凯, 范敬辉, 吴菊英, 谢长琼, 何方方.聚丙烯酸铅/三元乙丙橡胶复合材料的制备及辐射防护性能[J].高分子材料科学与工程,2017,33(5):138-141. Quan Ma, Wenbin Yang, Kai Zhang, Jinghui Fan, Juying Wu, Changqiong Xie, Fangfang He. Preparation and Radiation Shielding Property of Poly-Lead Acrylate/Ethylene-Propylenediene Rubber Composites[J]. Polymer Materials Science & Engineering,2017,33(5):138-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-05-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司