Abstract:The influence of poly(ethylene glycol) (PEG) with different molecular weight on the plasticization of poly(lactic acid) (PLA) was explored in this study. The plasticizing performance, mechanical properties, thermal behavior, and rheological property of the PLA/PEG blending materials were researched by torque rheometer, universal testing machine, differential scanning calorimetry (DSC), dynamic mechanical analyzer (DMA), thermogravimetric analysis (TGA), and rotational rheometer tests. The results show that PLA can be plasticized effectively by adding PEG, in which its plasticization performance increases with decreasing the molecular weight of PEG used, and the plasticization time of the PLA/PEG blends reduces from 250 s of the pure PLA to 128 s. The addition of PEG decreases tensile strength and increases elongation at break of the blends, where the lower molecular weight of PEG is used, the lower tensile strength of the blends will be achieved. The addition of PEG decreases the glass transition temperature(Tg) and cold crystallization temperature(Tcc) around 20 ℃, and increases the melting temperature (Tm) of PLA. Especially, lower molecular weight PEG presents better crystallization capability for PLA. However, the thermal decomposition temperature of the blends decreases with the addition of PEG, and lower molecular weight of PEG presents more decreasing in the thermal decomposition temperature. The rheology experiments indicate the complex viscosity (η*), storage modulus (G′) and loss modulus (G″) exhibit accelerated decrease with the decrease of molecular weight of PEG.