N-苯基马来酰亚胺/苯乙烯/α-甲基苯乙烯/马来酸酐四元共聚物的制备及对ABS的改性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis of NPhenylmaleimide/Styrene/Alpha Methyl Styrene/Maleic Anhydride Tetrapolymers and Its Modification to ABS Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以过氧化苯甲酰为引发剂,采用溶液聚合的方法合成了N-苯基马来酰亚胺/苯乙烯/α-甲基苯乙烯/马来酸酐四元共聚物。保持马来酸酐单体质量分数为5%,N-苯基马来酰亚胺单体质量分数为30%,改变α-甲基苯乙烯和苯乙烯的投料比合成系列四元共聚物。采用红外光谱、核磁共振和凝胶渗透色谱对四元共聚物的化学结构和相对分子质量进行了表征,考察了四元共聚物对ABS树脂耐热性及力学性能的影响。结果表明,α-甲基苯乙烯和苯乙烯的投料比为1∶1,数均相对分子质量为2.50×104 左右的四元共聚物的玻璃化转变温度(Tg)最高达到253.3 ℃,5%热分解温度可达到351℃。该共聚物可使ABS共混物Tg 升高到124.7℃,且具有较好的力学性能。

    Abstract:

    A series of N-phenylmaleimide/styrene/alpha methyl styrene/maleic anhydride tetrapolymers were synthesized with benzoyl peroxide as initiator by solution polymerization keeping the content of maleic anhydride and N-phenylmaleimide monomer at mass fraction of 5% and 30% respectively,and the feed ratios of alpha methyl styrene and styrene were varied. The chemical structures and molecular weights of the tetrapolymers were characterized by FT-IR, 1H-NMR and GPC. The heat resistance and mechanical properties of ABS blends were investigated by DSC and TGA. The results show that the glass transition temperature (Tg) of the tetrapolymer of which the feed ratio of alpha methyl styrene and styrene is 1∶1 with the molecular weight(Mn)about 2.50×104 reaches 253.3 ℃, and the 5% thermal decomposition temperature reaches 351 ℃. This tetrapolymer increases the Tg of ABS blends to 124.7 ℃, and can remain better mechanical properties of ABS blends than others.

    参考文献
    相似文献
    引证文献
引用本文

李 远,李文振,钱正华,张来胜,董 亮,王 论,唐颂超. N-苯基马来酰亚胺/苯乙烯/α-甲基苯乙烯/马来酸酐四元共聚物的制备及对ABS的改性[J].高分子材料科学与工程,2017,33(6):1-6. Yuan Li, Wenzhen Li, Zhenghua Qian, Laisheng Zhang, Liang Dong, Lun Wang, Songchao Tang. Synthesis of NPhenylmaleimide/Styrene/Alpha Methyl Styrene/Maleic Anhydride Tetrapolymers and Its Modification to ABS Resin[J]. Polymer Materials Science & Engineering,2017,33(6):1-6.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-06-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司