以CO2为气源的潜伏型环氧树脂发泡-固化剂的合成及应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省产学研前瞻性联合研究项目(BY2011124)


Preparation and Application of Latent Epoxy Resin Blowing-Curing Agents with CO2as Gas Source
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以脂肪族胺类环氧树脂固化剂为原料,乙醇为溶剂,制备了以CO2 为气源的新型潜伏型环氧树脂发泡-固化剂。通过红外光谱表征了发泡-固化剂的结构,证明活泼氢被CO2 封闭。通过热失重测定了发泡-固化剂的热分解性能和发气量,差示扫描量热分析证明发泡-固化剂/环氧树脂体系具有良好的常温稳定性。将发泡料加热到100 ℃以上,体系发生发泡-固化过程,得到环氧树脂泡沫。研究了成核剂SiO2 含量对环氧树脂泡沫结构和性能的影响,发现合适的成核剂加入量可有效改善泡沫的泡孔结构和力学性能。

    Abstract:

    A kind of novel foaming-curing agent for epoxy resin was prepared by reaction of commercially available aliphatic anime with CO2.. The structure of blowing-curing agent was characterized by infrared spectrum. Thermal decomposition property of resulting foaming-curing agent and gas evolution amount were analyzed by TGA. Single-pack foaming formulation with stability at ambient temperature was prepared by mixing the resulting foaming-curing agent with epoxy resin as verified by DSC. Epoxy foam can be obtained by heating the foaming formulation up to 100 ℃. The effect of nucleating agent SiO2content on the structure and properties of the epoxy foam was studied. The foam has the best mechanical properties and homogenous cell morphology when the filling level SiO2is appropriate.

    参考文献
    相似文献
    引证文献
引用本文

徐海进,任 强,吴 盾,宋 艳,汪称意,李 坚.以CO2为气源的潜伏型环氧树脂发泡-固化剂的合成及应用[J].高分子材料科学与工程,2017,33(6):18-23. Haijin Xu, Qiang Ren, Dun Wu, Yan Song, Chenyi Wang, Jian Li. Preparation and Application of Latent Epoxy Resin Blowing-Curing Agents with CO2as Gas Source[J]. Polymer Materials Science & Engineering,2017,33(6):18-23.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-06-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司