碳纤维原丝用二元丙烯腈聚合物的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of Acrylonitrile Copolymer Used for Carbon Fiber Precursor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计合成了双功能共聚单体3-羧基-3-丁烯酰胺(CBA),采用溶液聚合的方法制备丙烯腈二元共聚物作为碳纤维前驱体,详细研究了单体配比对聚合反应、聚合物结构和预氧化性的影响。结果表明,随着单体投料中CBA 含量的增加,聚合物中CBA含量增加,而相对分子质量和转化率均逐渐降低;红外光谱和差示扫描量热分析表明CBA 单体能够通过离子机理引发环化,使预氧化温度降低60 ℃以上,且随着CBA 单体含量的增加,离子环化反应加强,放热速率降低,有利于避免集中放热,CBA可以明显改善聚丙烯腈(PAN)的预氧化性能,有利于制备高性能碳纤维。

    Abstract:

    A bifunctional comonomer 3-carboxy-3-butene amide was synthesized and used to prepare poly(acrylonitrile- co-3-carboxy-3-butene amide) [P(AN-co-CBA)] by solution polymerization, which was used as precursor to produce carbon fiber. The effect of monomer feed ratio on the polymerization, structure and stabilization of P(AN-co-CBA) was studied in detail. The content of CBA in P(AN-co-CBA) increases with increase of the CBA/AN mole ratio, while the molecular weight of P(AN-co-CBA) and conversion of polymerization decrease. FT-IR and DSC results show that the initiation temperature of cyclization reduces more than 60 ℃ by the comonomer CBA through ionic mechanism, and the amount of ionic cyclization reactions increases with increase of the CBA content in P(AN-co-CBA), which slows the rate of heat release and avoids centralized heat releasing effectively. It can be concluded that the resultant P(AN-co-CBA) can improve the stabilization of PAN significantly, which is beneficial to prepare high performance carbon fibers.

    参考文献
    相似文献
    引证文献
引用本文

刘俊男,曹敏悦,汪 月,夏朝斌,王舒琳,巨安奇.碳纤维原丝用二元丙烯腈聚合物的合成及性能[J].高分子材料科学与工程,2017,33(6):37-41. Junnan Liu, Minyue Cao, Yue Wang, Chaobin Xia, Shulin Wang, Anqi Ju. Preparation and Properties of Acrylonitrile Copolymer Used for Carbon Fiber Precursor[J]. Polymer Materials Science & Engineering,2017,33(6):37-41.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-06-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司