高分子量二元丙烯腈聚合物的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省自然科学基金资助项目(BK20140159);国家自然科学基金资助项目(51503086)


Preparation and Properties of High Molecular Weight Acrylonitrile Copolymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计合成了双功能共聚单体3-酰胺基-3-丁烯酸甲酯(MMPA),以二元共聚合代替传统的三元共聚合,采用水相悬浮聚合的方法制备超高分子量丙烯腈二元共聚物作为碳纤维前驱体。采用傅里叶红外变换光谱仪、差示扫描量热分析仪和热失重分析仪详细研究了单体配比对聚合物相对分子质量、结构及预氧化性能的影响,结果表明,共聚单体MMPA的加入使预氧化温度由240℃降低至213℃,且投料中随着MMPA含量的增加预氧化温度降低,预氧化程度加深,合成的共聚单体MMPA能够有效改善丙烯腈聚合物的预氧化性能,宽化放热峰,避免放热集中;水相悬浮制备得到的丙烯腈聚合物相对分子质量高达106.7×104,有利于提高碳纤维的力学性能。

    Abstract:

    A bifunctional comonomer3-methoxycarbonylate-2-methylenpropanamide (MMPA) was synthesized to prepare poly(acrylonitrile-co-3-methoxycarbonylate-2-methylenpropanamide)[P(AN-co-MMPA)]by aqueous suspension polymerization, which was used as carbon fiber precursor instead of acrylonitrile terpolymers. The effect of the monomer feed ratio on the molecular weight, structure and stabilization of P(AN-co-MMPA) was studied by Fourier transform infrared spectroscopy, thermogravimetry and differential scanning calorimetry in detail. The results show that the initiation temperature is reduced from 240 ℃ to 213 ℃, and the extent of stabilization of P(AN-co-MMPA) increases with increasing of the MMPA content in the feed. It can be concluded that the stabilization of P(AN-co-MMPA) is effectively improved by the bifunctional MMPA with lower initiation temperature and broaden exothermic peak, which can avoid centralized heat release; the molecular weight of P(AN-co-MMPA) prepared by aqueous suspension polymerization is as high as 1.06×106, which is beneficial to improve the mechanical properties significantly.

    参考文献
    相似文献
    引证文献
引用本文

曹敏悦,刘俊男,汪 月,夏朝斌,王舒琳,巨安奇.高分子量二元丙烯腈聚合物的合成及性能[J].高分子材料科学与工程,2017,33(6):42-47. Minyue Cao, Junnan Liu, Yue Wang, Chaobin Xia, Shulin Wang, Anqi Ju. Preparation and Properties of High Molecular Weight Acrylonitrile Copolymer[J]. Polymer Materials Science & Engineering,2017,33(6):42-47.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-06-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司