不同密度聚酰亚胺泡沫的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

北京市优秀人才项目(2014400685627G0000)


Properties of Polyimide Foams with Different Densities
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    制备了基于3,3’-4,4’-二苯甲酮四酸二酐(BTDA)、多苯基多亚甲基多异氰酸酯(PAPI)及二苯甲烷二异氰酸酯(MDI)的聚酰亚胺泡沫,通过改变发泡时的环境压力,制备了不同密度的泡沫;利用红外光谱和扫描电镜对所制备的聚酰亚胺泡沫进行了结构与形貌表征,并对泡沫热性能和压缩强度行了表征。结果表明,所制备的泡沫密度随着制备压力的增大而增加,泡沫密度为7.3~160kg/m3,红外光谱确认了目标聚合物的合成,泡沫Tg 不低于250 ℃,且具有良好的热稳定性,经过250℃处理的泡沫的Tg 达到270℃,Td5% 达到404℃,均高于230℃处理得到的泡沫的性能。压缩性能测试表明所制备泡沫压缩强度随着密度增加而增加,当密度为160kg/m3 时,压缩强度达到1.88MPa。

    Abstract:

    Polyimide foams with different densities were prepared by changing the environmental pressure, using 3,3’,4,4’-benzophenonetetracarboxylic dianhydride (BTDA), polymethylene polyphenyl isocyanate(PAPI), methylene biphenyl diisocynante (MDI) as raw materials. The structure and morphology of the foam were characterized by FT-IR and SEM, and the thermal properties of the foam and compression strength were investigated. The results show that the densities, which is ranged from 7.3 kg/m3 to 160 kg/m3, increase while the pressure increases. The FT-IR confirms the synthesis of polyimide foams. The polyimide foams also have good thermal stability and high Tg no less than 250 ℃. It is observed that the polyimide foam which imidized at 250 ℃ has Tg up to 270 ℃ and Td5% about 404 ℃, superior to the polyimide which ia imdized at 230 ℃.The compression strength of the polyimide foam increases with the density increasing, it could be 1.88 MPa while the density is 160 kg/m3.

    参考文献
    相似文献
    引证文献
引用本文

酒永斌,翟 彤,刘 暘,翟 宇,曹 巍,李伯龙,王连才,周成飞.不同密度聚酰亚胺泡沫的制备与性能[J].高分子材料科学与工程,2017,33(6):131-134. Yongbin Jiu, Tong Zhai, Yang Liu, Yu Zhai, Wei Cao, Bolong Li, Liancai Wang, Chengfei Zhou. Properties of Polyimide Foams with Different Densities[J]. Polymer Materials Science & Engineering,2017,33(6):131-134.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-06-21
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司