改性SBA-15介孔孔道内甲基丙烯酸甲酯的反向原子转移自由基聚合的溶液聚合
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51263004)


Reverse Atom Transfer Radical Polymerization of Methyl Methacrylate in the Modified Mesoporous SBA-15
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分别使用硅烷偶联剂KH-151、KH-560、KH-570对介孔材料SBA-15进行改性,以改性前后的介孔材料作为“微反应器”,在其内部进行了甲基丙烯酸甲酯(MMA)的反向原子转移自由基聚合(RATRP)。通过X射线衍射、氮气吸附-脱附测试、热重分析、差示扫描量热、凝胶渗透色谱、傅里叶变换红外光谱等手段对所得产物进行了测试表征。结果表明,MMA在改性前后的SBA-15内部聚合成功;聚合后的复合材料仍然保持其SBA-15的母体结构,但比表面积、孔径、孔体积均有所下降;孔道内所得的PMMA较常规RATRP聚合所得的PMMA相对分子质量有所增加,相对分子质量分布变宽,初始热分解温度升高,玻璃化转变温度升高;改性后介孔材料对反应液有更好的吸附能力且对孔道内的MMA 的RATRP溶液聚合有更强的孔道限制作用。

    Abstract:

    Mesoporous SBA-15 was modified with silane coupling agent vinyl-triethoxysilane (KH-151), γ-(2,3-epoxypropoxy)propy-trimethoxysilane (KH-560), 3-methacryloxypropyl -trimethoxysilane (KH-570) (named as M-SBA-15), respectively. Then SBA-15 and M-SBA-15 were served as “microreactor” to carry out the reverse atom transfer radical polymerization(RATRP)of methyl methacrylate(MMA). The products were characterized by XRD, N2 adsorption/desorption, TG, DSC, GPC and FT-IR. The results demonstrate that the MMA is suuccessfully polymerized in the pores of SBA-15. The mesoporous structures of PMMA/SBA-15 composite materials are maintained, but the regularity decreases. The molecular weights, thermal stability and glass transition temperature(Tg) of the PMMA obtained in the pore are higher than those of the normal PMMA synthesized by RATRP, while the polydispersity indexs are broader. The modified mesoporous SBA-15 exhibits stronger adsorption ability and confined effect than prue SBA-15.

    参考文献
    相似文献
    引证文献
引用本文

周泓望,陈明森,孙发孟,张发爱.改性SBA-15介孔孔道内甲基丙烯酸甲酯的反向原子转移自由基聚合的溶液聚合[J].高分子材料科学与工程,2017,33(7):17-22. Hongwang Zhou, Mingsen Chen, Fameng Sun, Fa’ai Zhang. Reverse Atom Transfer Radical Polymerization of Methyl Methacrylate in the Modified Mesoporous SBA-15[J]. Polymer Materials Science & Engineering,2017,33(7):17-22.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司