木质素填充改性SBS弹性体的热氧老化性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31670567);黑龙江省科学基金资助项目(C201335);东北林业大学大学生院级创新训练计划(CL201605)


Thermal Oxidation Aging Properties of Modified Styrene-Butadiene-Styrene Block Copolymer Elastomer Filled with Lignin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用溶液浇铸的方法制备了玉米秸秆木质素填充改性的苯乙烯/丁二烯/苯乙烯嵌段共聚物(SBS)材料。利用力学性能测试、动态力学分析、傅里叶变换红外光谱及X射线光电能谱等方法研究了木质素填充改性对SBS热氧老化性能的影响。力学性能测试结果表明,与未改性的SBS弹性体相比,在相同的热氧老化时间下,木质素填充SBS弹性体拉伸强度的降幅由74.53%降至67.37%,断裂伸长率的降幅由72.89%降至46.45%;动态力学分析表明,木质素的添加有效减缓了SBS低温玻璃化转变温度的变化;红外光谱和X射线光电能谱分析表明,木质素的填充减缓了热氧老化造成的含氧基团含量增加的幅度。SBS弹性体中玉米秸秆木质素的填充可以起到防老化的效果。

    Abstract:

    The styrene/butadiene/styrene block copolymer (SBS) membrane materials filled with corn straw lignin were prepared through solution casting. The effects of lignin contents on the thermal-oxidation aging properties of SBS were studied by mechanical testing, DMA, FT-IR, and XPS. The tensile test results show that, compared with pure SBS, the tensile strength of the SBS filled with lignin decreases for 67.37% instead of 74.53%, and the elongation at break decreases for 46.65% instead of 72.89% at the same thermal-oxidation aging time. The DMA analysis indicates that the change of the glass-transition temperature (Tg) slows down by filling with lignin. The FT-IR and XPS analysis results show that lignin restrains the generation of the oxygen-containing groups in the thermal-oxidation aging. And the corn straw lignin plays an age inhibiting role in the filling modification of SBS.

    参考文献
    相似文献
    引证文献
引用本文

赫羴姗,张艳秋,王 岚,秦泽恒,周煦桐,付 豪,邸明伟.木质素填充改性SBS弹性体的热氧老化性能[J].高分子材料科学与工程,2017,33(7):70-75. Shanshan He, Yanqiu Zhang, Lan Wang, Zeheng Qin, Xutong Zhou, Hao Fu, Mingwei Di. Thermal Oxidation Aging Properties of Modified Styrene-Butadiene-Styrene Block Copolymer Elastomer Filled with Lignin[J]. Polymer Materials Science & Engineering,2017,33(7):70-75.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司