聚对苯撑苯并二噁唑原纤化纳米纤维制备技术及结构性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Performance of Fibrillated Nano-Fiber of Poly[p-phenylene benzobisoxazole]
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚对苯撑苯并二口恶唑(PBO)纤维是一种具有多重原纤结构的高分子聚合物。通过机械力作用可以使PBO 纤维发生原纤化,制备具有直径小于100nm 的PBO 原纤化纳米纤维。文中对PBO 纤维发生原纤化的历程及机理进行研究,扫描电镜观察发现PBO 纤维的原纤化过程包括:脱除皮层、主干破坏、进一步原纤化等阶段,剥离和劈裂是原纤化的主要方式。经过原纤化处理的PBO 纤维,呈现不同尺寸纤维组成的多分散体。打浆度70°SR的PBO 原纤化纳米纤维的直径可达到50nm,其保水值118%,纤维长度分布主要集中在0.3~0.5mm,比表面积21.89m2/g。以PBO 原纤化纳米纤维为原料,通过湿法成形方式在抄纸系统上制备的纸基材料力学性能随着原纤化程度增加而增加。

    Abstract:

    Poly[p-phenylene benzobisoxazole](PBO) fiber is a kind of polymer with fibrillar hierarchial structure. PBO fiber can be fibrillated by mechanical force. After this process, fibrillated nano-fiber of PBO of which the diameter can be less than 100 nm was formed. The process and mechanism of fibrillation was studied. The results of SEM show that the process of fibrillation includes three steps: (a) the skin structure falling off, (b)the trunk fiber being destroyed and (c) deeper fibrillation. And peeling and splitting are two methods of fibrillation. There are different sizes of PBO fiber after fibrillation. The diameter of fibrillated nano-fiber of 70°SR can be 50 nm. And its water retention value can increase to 118%, the distribution of fiber length is 0.3~0.5 mm and the specific surface area is up to 21.89 m2/g. Paper-based composites were made through wet forming process with fibrillated nano-fiber of PBO. The mechanical properties of paper-based composites increase with the degree of fibrillation.

    参考文献
    相似文献
    引证文献
引用本文

曹雪鸿,王 宜,耿 浩,宋 虹,胡 健.聚对苯撑苯并二噁唑原纤化纳米纤维制备技术及结构性能[J].高分子材料科学与工程,2017,33(7):106-110. Xuehong Cao, Yi Wang, Hao Geng, Hong Song, Jian Hu. Preparation and Performance of Fibrillated Nano-Fiber of Poly[p-phenylene benzobisoxazole][J]. Polymer Materials Science & Engineering,2017,33(7):106-110.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司