反溶剂法制备肉桂醛/乙基纤维素微胶囊及其表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家“973”预研项目(2014CB260411);陕西科技大学学术带头人团队项目(2013XSD19)


Characterization of Cinnamaldehyde/Ethyl Cellulose Microcapsule Prepared by Anti-Solvent Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用反溶剂法,以肉桂醛为芯材,乙基纤维素(EC)为壁材制备肉桂醛微胶囊,研究了不同芯壁比对微胶囊包埋率及形貌的影响;采用扫描电镜对所得微胶囊的表面形貌进行观察,借助红外光谱和热重分析等对其形成机理能进行了分析,并对其缓释性进行了测试。结果表明,当芯壁比为1∶3时包埋率最大,达到83%,载药量为21%,微胶囊为分散性好、粒径200nm~1μm 的球形粒子。红外光谱、热重分析结果表明EC可以通过自组装将肉桂醛包裹于其形成的疏水性空腔内部。微胶囊存放7d后,其中的肉桂醛释放率仅为23%,而肉桂醛混合物中肉桂醛的释放率达到了54%,表明肉桂醛微胶囊具有一定缓释性。

    Abstract:

    Microcapsules were prepared using ethyl cellulose(EC) as wall materials and cinnamaldehyde as core via simple anti-solvent method. The influence of ration of core to wall on encapsulation rate and morphology of microcapsules was studied by SEM, FT-IR and TGA. And the release properties of cinnamaldehyde were evaluated. The results show that at the optimal ratio of core to wall of 1∶3, the obtained microcapsules possess high monodisperse spherical shape, have the size ranging from 200 nm~1 μm, and the cinnamaldehyde-loading ratio of 21% and the encapsulation efficiency of 83%. The results of FT-IR and TGA demonstrate that cinnamaldehyde is successfully entrapped with EC in its hydrophobic cavity formed by self-assembly. The results of storage experiment show that the release ratio of the microcapsules is 23% only after 7 d stored, whereas that of the mixture of cinnamaldehyde and EC is 54%, which indicate that the obtained microcapsules have slow-releasing property.

    参考文献
    相似文献
    引证文献
引用本文

杨 辉,高红芳.反溶剂法制备肉桂醛/乙基纤维素微胶囊及其表征[J].高分子材料科学与工程,2017,33(7):121-125. Hui Yang, Hongfang Gao. Characterization of Cinnamaldehyde/Ethyl Cellulose Microcapsule Prepared by Anti-Solvent Method[J]. Polymer Materials Science & Engineering,2017,33(7):121-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司