甲基丙烯酸甲酯共聚改性水性聚氨酯膜制备及膜性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21476055)


Preparation and Properties of Methyl Methacrylate Modified Waterborne Polyurethane Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用甲基丙烯酸甲酯对水性聚氨酯乳液进行共聚改性,制备了甲基丙烯酸甲酯改性水性聚氨酯渗透汽化膜。借助衰减全反射傅里叶变换红外光谱、扫描电镜、热重分析等方法,表征了改性前后膜的结构;考察了膜的溶胀率、溶解选择性和渗透汽化性能。结果表明,甲基丙烯酸甲酯共聚改性水性聚氨酯膜较原聚氨酯膜的热稳定性明显提高;改性膜对苯具有良好的亲和性;随着甲基丙烯酸甲酯与聚氨酯的质量比从0∶100提高到15∶100,膜对苯/环己烷(质量比5/95)的溶解选择因子从1.4增加到2.1,分离因子从2.5上升到3.2,但渗透通量由92.8 kg·μm·m-2·h-1下降到50.4 kg·μm·m-2·h-1。

    Abstract:

    Waterborne polyurethane (WPU) was modified by copolymerization of methyl methacrylate (MMA). A series of pervaporation membranes were fabricated to separate benzene and cyclohexane. By ATR-FT-IR, SEM, TGA, the structure of the MMA modified membranes were characterized. The swelling degree, solubility selectivity and pervaporation property of the membranes were investigated. It is shown that the thermal stability of membranes is significantly improved. The obtained membranes show good affinity to benzene. The solubility selectivity factor increases from 1.4 to 2.1 and the separation factor increases from 2.5 to 3.2, as the mass ratio of MMA to WPU increases from 0∶100 to 15∶100. Nevertheless, the permeation flux decreases from 92.8 kg·μm·m-2·h-1 to 50.4 kg·μm·m-2·h-1.

    参考文献
    相似文献
    引证文献
引用本文

叶辉, 席涛, 姚路路, 郝文涛, 崔鹏.甲基丙烯酸甲酯共聚改性水性聚氨酯膜制备及膜性能[J].高分子材料科学与工程,2017,33(7):144-149. Hui Ye, Tao Xi, Lulu Yao, Wentao Hao, Peng Cui. Preparation and Properties of Methyl Methacrylate Modified Waterborne Polyurethane Membrane[J]. Polymer Materials Science & Engineering,2017,33(7):144-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司