细菌纤维素/聚谷氨酸复合水凝胶的辐照制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广州市产学研协同创新重大专项(201508020035)


Preparation of Bacterial Cellulose/Poly γ-Glutamic Acid Composite Hydrogels via Co60 γ-Irradiation Crosslinking and Their Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用Co60-γ射线辐照交联法制备细菌纤维素/聚谷氨酸(BC/PGA)复合水凝胶。采用红外光谱和扫描电子显微镜等对复合水凝胶的结构进行表征,研究了BC引入对复合水凝胶的凝胶分数、热失重、溶胀性能、压缩性能和流变性能的影响,并利用CCK-8法对复合水凝胶进行了细胞毒性评价。研究结果表明,辐照作用下BC纳米纤维和PGA形成双交联复合凝胶网络,BC可有效增加复合水凝胶的压缩强度、储能模量(G′)和凝胶分数,降低复合水凝胶的平衡溶胀度。50 kGy辐照剂量下,相对于纯PGA水凝胶,复合水凝胶压缩强度增大5倍,G′增大10倍。同时复合水凝胶无细胞毒性,可安全应用于生物医学领域。

    Abstract:

    The bacterial cellulose/poly γ-glutamic acid (BC/PGA) composite hydrogels were prepared by Co60 γ-irradiation crosslinking method. The composite hydrogels were characterized by infrared spectra (IR) and scanning electron microscope (SEM), and their gel fraction, thermal stability, swelling behavior, compression properties and rheological properties were investigated. Additionally, their cytotoxicity was evaluated by CCK-8 assay. The results show that BC nanofibers and PGA can form the composite hydrogels with double crosslinking structure via γ-irradiation. The addition of BC increases compressive strength, storage modulus (G′) and the gel fraction but decreases the equilibrium swelling ratio of the BC/PGA composite hydrogels. The compressive strength and storage modulus of composite hydrogels increase 5 times and 10 times respectively at the irradiation dose of 50 kGy. Moreover, the BC/PGA composite hydrogels are non-toxic, indicating their safety for biomedical application.

    参考文献
    相似文献
    引证文献
引用本文

戴丽莎, 房邦仁, 梁朝伟, 曾戎, 屠美, 赵剑豪.细菌纤维素/聚谷氨酸复合水凝胶的辐照制备及性能[J].高分子材料科学与工程,2017,33(7):167-171. Lisha Dai, Bangren Fang, Chaowei Liang, Rong Zeng, Mei Tu, Jianhao Zhao. Preparation of Bacterial Cellulose/Poly γ-Glutamic Acid Composite Hydrogels via Co60 γ-Irradiation Crosslinking and Their Properties[J]. Polymer Materials Science & Engineering,2017,33(7):167-171.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-07-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司