Abstract:A positively charged composite nanofiltration (NF) membrane was formed by interfacial polymerization with polyethylenimine (PEI) and trimesoyl chloride (TMC) on a hydrophilic polytetrafluoroethylene (PTFE) substrate. Surface chemical structure, surface morphology and charge of the prepared composite membrane were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FT-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and Zeta potential analyzer. The results indicate that a dense multi-structure is formed on the hydrophilic PTFE substrate. The prepared composite nanofiltration membrane is positively charged at a neutral pH. After preparation parameters were optimized, the prepared composite nanofiltration membrane presents the rejection of 95.7% and permeate flux of 13.47 L/(m2·h)(MgCl2). In addition, rejection values of different solutes are the following order, MgCl2(95.7%)>MgSO4(90.7%)>Na2SO4(77.5%)>NaCl(58.1%). The molecular weight cut off(MWCO) of PEG is 402. It suggests that the prepared composite nanofiltration membrane may be potential in the field of water softening.