成型方法对纳米纸表面形貌与光学性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家林业局948项目(2015454);国家自然科学基金资助项目(31470599);江苏省高校优势学科建设项目(PAPD)


Effects of Different Preparation Procedures on the Surface Morphology and Optical Properties of Cellulose Nanopapers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过TEMPO 氧化、高压均质作用成功从机械预处理后的针叶木纤维中,抽离出直径20~25nm、长度几百纳米到几微米的纤维素纳米纤丝(CNFs);然后以此为原料分别采用浇铸、真空抽滤的方法制备纳米纸。使用环境扫描电镜,原子力显微镜、紫外/可见/近红外分光光度计研究了不同成型方法对纳米纸的表面形貌、表面粗糙度、透光率和光学雾度等性能的影响。结果表明,浇铸法与真空抽滤法相比,通过浇铸法制备的纳米纸表面更加光滑(均方根表面粗糙度为3.3nm);具有更加优异的光学性能,在600nm 处透光率为89%,在550nm 处雾度为2.9%,此浇铸法更适合于制备高透明高清晰的纳米纸。

    Abstract:

    After TEMPO oxidation and high pressure homogeneous, the cellulose nanofibrils were successfully extracted from the soft wood fiber which was pretreated by mechanical treatments. Then through the casting and vacuum filtration methods, the cellulose nanofibrils was fabricated into nanopapers. Effects of different preparation procedures on the surface morphology, surface roughness, light transmittance and optical haze of cellulose nanopapers were studied by environment scanning electron microscope (SEM), atomic force microscope (AFM), and UV/VIS/NIR spectrophotometer. Compared with vacuum filtration, nanopapers produced by casting have more smooth surface (rootmeansquare roughness of 10.6 nm) and more excellent optical properties: a high transmittance (89%) at 600 nm, a low haze (2.9%) at 550 nm. Therefore, the casting procedure is recommended for preparing highly transparent and clear nanopapers.

    参考文献
    相似文献
    引证文献
引用本文

杨伟胜,焦 亮,戴红旗.成型方法对纳米纸表面形貌与光学性能的影响[J].高分子材料科学与工程,2017,33(8):96-101. Weisheng Yang, Liang Jiao, Hongqi Dai. Effects of Different Preparation Procedures on the Surface Morphology and Optical Properties of Cellulose Nanopapers[J]. Polymer Materials Science & Engineering,2017,33(8):96-101.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-08-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司