木粉对聚乳酸流变、结晶及发泡行为的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金项目资助(2572017CB15);省留学归国人员科学基金(LC2015011);中国博士后科学基金特别资助(2014T70303)


Effect of Wood Flour on the Rheology, Crystallization and Foaming Behavior of Polylactide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以超临界CO2为发泡剂,设计高温保压、低温快速泄压发泡的工艺,制备微孔发泡木粉/聚乳酸复合材料。利用X射线衍射仪、差示扫描量热仪、旋转流变仪对复合体系结晶及流变性能进行分析。采用排水法及扫描电镜研究了木粉含量对发泡材料表观密度、发泡倍率,泡孔密度及泡孔形貌的影响。结果表明,木粉的加入提高了木粉/聚乳酸复合材料熔体的复数黏度和储能模量,降低了聚乳酸的结晶度,提高了泡孔密度,减小了泡孔尺寸。当木粉含量为20%时,木粉/聚乳酸发泡材料表观密度为0.19g/cm3,发泡倍率达到7倍,泡孔密度为7.23×108cm-3,平均泡孔直径为20μm。

    Abstract:

    Using supercritical CO2 as foaming agent, microcellular foaming wood flour/polylactide(PLA) composites were prepared by saturating above the melting temperature and at high pressure, then quenched to the crystallization temperature and quickly decreasing the pressure. XRD and DSC were used to analyze the crystallization behavior, then the rheological properties were measured through the rotational rheometer. Water displacement method and SEM were used to analyze the apparent density, expansion ratio, cell density and cell morphology of foamed composites in the presence of different wood flour contents. Results reveal that the cooperation of wood flour increases the complex viscosity and storage modulus, decreases the crystallinity and is beneficial for the higher cell density. When the content of wood flour is 20%, the apparent density is 0.19 g/cm3, the expansion ratio reaches 7 times, the cell density is 7.23×108/cm3 with the uniform cell size about 20 μm.

    参考文献
    相似文献
    引证文献
引用本文

王友勇,李 浩,宋永明,代 璐,王发扬.木粉对聚乳酸流变、结晶及发泡行为的影响[J].高分子材料科学与工程,2017,33(8):108-113. Youyong Wang, Hao Li, Yongming Song, Lu Dai, Fayang Wang. Effect of Wood Flour on the Rheology, Crystallization and Foaming Behavior of Polylactide[J]. Polymer Materials Science & Engineering,2017,33(8):108-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-08-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司