聚乳酸微胶囊的层层自组装及表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Characterization of Poly(lactic acid) Microcapsules by Layer-by-Layer Self-Assembly Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以碳酸钠和氯化钙为原料制备的碳酸钙微球为模板,采用层层自组装的方法,将左旋聚乳酸(PLLA)和右旋聚乳酸(PDLA)逐层组装在碳酸钙微球上,然后用乙二胺四乙酸二钠(EDTA)去除模板碳酸钙后成功制备了聚乳酸中空微胶囊,并采用扫描电镜、原子力显微镜、透射电子显微镜、激光共聚焦显微镜、差示扫描量热仪和广角X射线衍射仪对微胶囊进行初步表征。结果表明,微胶囊层形成的层间驱动力为聚乳酸异构体之间的立构复合作用,微胶囊呈现经典的褶皱状,囊壁厚度约为90~100nm,内部为空腔结构,囊壁允许小分子物质透过,在载药缓释领域具有很好的应用前景。

    Abstract:

    Poly(lacticacid)(PLA) microcapsules were fabricated by layer-by-layer self-assembly of poly(L-lactic acid)(PLLA) and poly(D-lactic acid)(PDLA) onto the CaCO3 templates which were synthesized from Na2CO3 and CaCl2, followed by removing CaCO3 templates using ethylene diamine tetraacetic acid (EDTA). The microcapsules were characterized by SEM, AFM, TEM, CLSM, DSC, and XRD. The results show that the interlayer driving force of microcapsules is the stereocomplex affection between PLA isomers. The morphology of microcapsule displays classical drape. The thickness of microcapsule wall is between 90nm and 100 nm, and the small molecules can pass through the wall. Therefore, the prepared capsules have potential application in the field of drug sustained releasing.

    参考文献
    相似文献
    引证文献
引用本文

李亚东,王 敏,张慧慧,杨革生,邵惠丽.聚乳酸微胶囊的层层自组装及表征[J].高分子材料科学与工程,2017,33(8):158-162. Yadong Li, Min Wang, Huihui Zhang, Gesheng Yang, Huili Shao. Preparation and Characterization of Poly(lactic acid) Microcapsules by Layer-by-Layer Self-Assembly Method[J]. Polymer Materials Science & Engineering,2017,33(8):158-162.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-08-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司