一种以普朗尼克为大分子交联剂的强韧型凝胶制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51573187,51373174);西部之光;高分子材料工程国家重点实验室自主课题(sklpme2017-2-05)


Preparation and Characterization of a Tough Gel with Pluronic as Crosslinkers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对商用普朗尼克(Pluronic)进行修饰,使其形成外层带可聚合基团的胶束,参与2-丙烯酸甲氧基乙酯(MEA)的聚合反应,得到一种强韧型的胶束凝胶(Pluronic/PMEAgel)。对制备的凝胶进行了形貌、热力学、力学强度的表征。结果显示,含水平衡的凝胶在压缩形变85%时压缩强度在1.1MPa以上,压缩不破碎且形变可回复。凝胶干燥之后变得更加柔韧,不同胶束凝胶拉伸断裂强度在550~1200kPa之间;压缩强度在25MPa以上。

    Abstract:

    The commercial Pluronic was modified to form micelles with polymerizable groups on the outer layer and participated in the polymerization of 2propenoethacrylate (MEA) to obtain a micellar gel. The prepared gel was characterized about its morphology, thermodynamics and mechanical strength properties. The results show that the compressive strength of the gel at the swelling equilibrium state exceeds 1.1 MPa at 85% strain and the gel won’t break up at 90% deformation. After dried, the gel becomes more flexible with the tensile strength of the different micellar gels between 550~1200 kPa, and the compressive strength above 25 MPa.

    参考文献
    相似文献
    引证文献
引用本文

陈娇龙, 冯俊峰, 李帮经, 张晟.一种以普朗尼克为大分子交联剂的强韧型凝胶制备[J].高分子材料科学与工程,2017,33(9):148-152. Jiaolong Chen, Junfeng Feng, Bangjing Li, Sheng Zhang. Preparation and Characterization of a Tough Gel with Pluronic as Crosslinkers[J]. Polymer Materials Science & Engineering,2017,33(9):148-152.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-09-28
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司